Jetted Whirlpool Bathtub Pumps& Heaters

Jetted whirlpool bath tubs work much like hot tubs. Spa Guts offers universal-fit pumps and heaters for whirlpool bath tubs. Our bath tub heaters and replacement pumps fit all brands of bath tubs, including Jacuzzi, American Standard, and Kohler.

Bathtub Heaters

If your jetted whirlpool bath tub did not come with a bath tub heater, it is easy to add one to keep your bath water at a constant temperature. The heater heats the bath water when your bathtub pump is running and the water temperature is below the set temperature. The heater automatically turns off once the set water temperature is reached or you turn your bath tub pump off.

What type of bath tub heater you need depends on the configuration of your bath tub’s plumbing and whether you need 110 or 220 volts. Spa Guts carries bath tub heaters to fit all styles of whirlpool bath tubs.

Bath tub heaters come in two basic configurations: T-style and inline. The one you need depends on how the plumbing around your bath tub pump is laid out. As all whirlpool bath tubs were designed with a bath heater as an option, it is usually obvious just from looking at the layout to figure out which style bath heater was intended.

Inline bath tub heaters may be positioned upstream from the pump (“vacuum side”) or downstream (“pressure side”), requiring different configurations of the inline bath tub heater.

Most bath tubs requiring inline heaters use 1.5” plumbing, but a few Jacuzzi(RG) brand bath tubs use 2.0” plumbing.

Most whirlpool bath tubs are wired for 110 volts, but a few extra-large bath tubs are wired for 220 volts.

Inline Style Bathtub Heaters T-Style Bathtub Heaters

Choose Voltage and Plumbing Size
110 Volts, 1.5” plumbing, vacuum or pressure side mounting
110 Volts, 2.0” plumbing, vacuum or pressure side mounting
220 Volts, 1.5” plumbing
Choose Voltage
T-Style Bath Heater – 110 Volts
T-Style Bath Heater – 220 Volts

Bathtub Pumps

Our whirlpool bathtub pump replaces any existing bathtub pump. Four horsepower levels are available, depending on the number of jets in your bath tub.

Bathtub Pump

Whirlpool Bathtub Accessories

You can automatically limit the time for your pump and heater to run, or ensure there is an adequate water level for them to run. These features are especially important for hotel installations.

Bathtub Pump & Heater Controller

Prevent endless running of your pump and heater.

Bathtub Controller

Bathtub Water Level Sensor

Prevent damage from spraying water. Ensure your bath tub’s water level is above the jets before allowing the pump to run.

Bathtub Water Level Sensor