SpaGuts Replacement Circuit Board, CS-Series, Dual Pump, CS6230

Replacement circuit board for SpaGuts brand CS-Series Electronic Controllers.  Choose the correct circuit board for the SpaGuts brand Electronic Controller and Topside Panel that you have.  If you are not sure, contact SpaGuts for help selecting the correct replacement circuit board for your SpaGuts brand Electronic Controller.

This is the replacement circuit board for the SpaGuts brand CS Series dual pump Electronic Controller and 6-button topside panel, models CS6230 and CS6237, ECO-3, wiring diagram 8017 or 6840 or 8020, and product numbers Y4ENV0L-9505QEZ, Y4ENVVL-95W5QEZ or Z4HNVOL-340D4EN, Chips 313DA0213 PROG 491 37-0050B, or 313DA0190 PROG 582 37-0050C.  Also use as a replacement for the following board assembly numbers:  33-0024B-R4-K, 33-0024B-R4, 33-0024B-R3, 33-0024B-R2, 33-0024B-R1, 33-0024B-K, 33-0024B

SpaGuts P/N:  10-150-1501, Circuit Board, 6230, dual pump, WD 8017/6840

NOTE 1: The main circuit board will have the part numbers 33-0024-U, 3-62-7019, 0202-100036 (located on a white label off the side of board relays, near white terminal block, that includes the Serial Number). MAKE SURE to verify the MODEL, CHIP, and Board Assembly numbers to determine the correct board replacement.

NOTE 2: This replacement circuit boards will NOT work for other brand controllers and topside panels. They will ONLY work with SpaGuts brand CS-Series Electronic Controllers and corresponding topside panels. Do not attempt to modify a SpaGuts brand Electronic Controller without contacting SpaGuts tech support.

This item come with a 1-year limited warranty.

When selecting your spa circuit board, it’s critical that you go by part numbers and NOT just by appearances.  The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number.  Do NOT purchase a hot tub circuit board just because it looks the same OR have the same Model Number as the one you’re replacing.  Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels.  NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations.  If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup.  Replacement spa circuit boards are shipped in clear sealed bags with Yellow Warning Label.  Verify through the clear sealed bag that the correct circuit board was received prior to opening the bag.  Sealed bags that are opened voids the return policy for spa circuit boards.

Need a replacement operation manual? Click here

CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt or blown fuses, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.