Spa-Flo Side Discharge Pump - 48 Frame

Looking for a Side Discharge Pump with standard 1.5 inch threaded fittings?

Our New Spa-Flo Pump consist of a Side Discharge pump wet end with 1.5-inch threaded fittings and a 48-frame, 2-speed, AO Smith Electric Spa Motor. Spa-Flo Pumps are currently available in 1.0 horsepower 110 volts, 1.5 horsepower 110 volts, and 2.0 horsepower 220 volts. Our dual speed motors can also be wired to operate in single speed.

You may add a color coded J&J mini 4ft cord which is typically the industry standard motor cord or if your existing spa controller does not accept the J&J mini plug type you can wire your existing cord to the motor for a quick and easy retrofit. Contact us if a 4-prong male amp plug is needed for the motor cord.

Each pump order includes a pair of 1.5-inch pump unions that screws directly onto the pump wet end threading and also fits onto 1.5-inch PVC pipes.

To retrofit, the pump unions are to be glued onto the spas existing plumbing and the pump unions screw directly onto the pump suction and return fittings and seal tightly with included o-rings.

AO Smith is one of the largest manufacturers of spa motors in the world and in our opinion is the very best money can buy. We offer brand new pumps and motor, also the best in the industry.

Pumps with 48-frame motors carry a 3-year limited warranty on the pump and 1 year on the motor.

Click here to see water flow chart and Amp rating for the Spa-Flo Pump.

Is Your Pump Above the Water Line?

If you need to install your spa pump near or above the waterline - as is common for in-ground spas - you will need a pump pot. The pump pot prevents water from draining back into the spa when the motor is turned off