Aeware, Gecko IN.YE-5-H5.5 Spa Controller Kit w/Topside IN.K450, Cords, 5.5KW (SPECIAL ORDERS)

Advanced electronics!  Water Resistance!  WIFI control from your iPhone!  Aeware by Gecko IN.YE-5-H5.5, aka Y-Series, Controller Kit with Topside Panel IN.K450. Application is 220V 60Hz Power Supply (4-Wire required for 220V).  Setup to operate Pump1, Pump 2, Blower/Pump 3, Ozone and Circ Pump.  Heater is 5.5KW on 220V application.  Available as a Field Configurable Kit, or Factory Configured (Plug-N-Play)!

SPECIAL ORDER NOTES:  THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 20-60 BUSINESS DAYS LEAD TIME BEFORE SHIPPING.  SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

PLEASE NOTE THAT FACTORY CONFIGURATION IS CURRENTLY NOT AVAILABLE FOR THIS CONTROLLER KIT.  PLEASE SELECT FIELD CONFIGURABLE KIT WHEN ADDING TO CART.

SpaGuts P/N:  10-720-4555

KIT INCLUDES:

• IN.YE-5-H5.5 Controller with 5.5KW Flo-thru Heater, 0610-221066-363
• IN.K450 Topside Panel with Overlay, 7-Button, 10ft Cable, 0607-005012
• TWO Amp Cords, 2-Speed, 14 AWG, 4-Wire, 4ft, 95100519
• TWO Amp Cords, 1-Speed, 14 AWG, 3-Wire, 4ft, 95100517
• Light Cable with Socket, 8ft, 9920-400489 (40-175-9912 Light Bulb Sold Separately)
• Pair of 2 inch Heater Split Nuts, Heater Tailpieces and O-ring Gaskets
• Topside Cover (Adapter) Plate, 8.5 inch x 3.9 inch, 9917-102123
• Supplemental Installation Instructions (Included and also available online. See Tabs Above)
• Quick Start Card (Included and also available online. See Tabs Above)
• System Flyer (Only Available Online. See Tabs Above)
• Tech Book (Only Available Online. See Tabs Above)

INPUT CONNECTIONS:

• 220V 60Hz Power Supply
• Pump 1, 1 or 2-Speed, 110V/220V, 15A Max*
• Pump 2, 1 or 2-Speed, 110V/220V, 15A Max*
• Blower/Pump3, 1-Speed, 110V/220V, 15A Max*
• Ozone, 110V/220V, 6A Max*
• Direct (Audio/Video), Constant 110V/220V, 10A Max*
• Keypad, C1
• Communication, CO
• Light, 12V, 12W (1 Intensity), 1A Max*

*NOTE 1:  SEE SYSTEM FLYER FOR AMP RATING LIMITATION

**NOTE 2:  THE CIRCULATION PUMP CIRCUIT OPTION IS NO LONGER AVAILABLE ON THIS CONTROLLER KIT.  IF A CIRCUIT FOR A SMALL CIRCULATION PUMP IS NEEDED, SEE THE 4.0KW VERSION WITH PART NUMBER 10-720-5450.

SYSTEM REQUIREMENTS:

• 220V Power requires 2 Hots, Neutral and Ground
• The 5.5KW Hi-Flo Heater requires a Minimum of 25 GPM of Water Flow, and Minimum 1.5-inch Plumbing

Features:

• Advanced electronics! Water Resistance! (Upon proper installation, and a water-tight power supply clamp is used)
• In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
• In.seal - Watertight Protection - In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components.
• In.kin - Kinetic Heat Monitoring - First ever UL approved kinetic heating protection manages water temp. increase generated by pump heat dissipation. Hardware protection shuts all accessories off if it senses water overheat.
• In.flo - Dry-Fire Protection - A new heater safety system located in the in.therm power box - an all-electronic dry-fire protection.
• In.t.cip - Water Temperature Algorithm - In.t.cip is an intelligent water temp. refresh algorithm that calculates optimal time to start pumps and get water temp. readings. In.t.cip continuously readjusts heater start time.
• In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to in.ye and contains data to program or configure its system. In.ye executes the data upload automatically.
• Field-Serviceable Parts - The Y Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
• UL Recognized for your safety
• 2-Year Limited Warranty

Auxilary Topside Panel (Sold Separately):

• IN.K120-3OP Auxiliary Topside Panel, 0607-005019

Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.

WIFI Optional (Sold Separately):

• iPhone App! Control your spa from your iPhone, iPad, or iPod!

Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely!  Also works with Android!  The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WI-FI control.  Imagine the possibility of being able to monitor your spa and control it remotely within your wifi network with the Home App, or do it all remotely from across country with the World App using the internet.  The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes!  Basically Amazing!!!

• (*iPhone, iPad, iPod and computer are not included)

Dimensions (Approx.):

• Controller: 17.38 inch L x 11.2 inch H x 5.37 inch W
• Heater: 15 inch L x 2 inch Diameter
• Topside Panel: 7.06 inch L x 2.81 inch W
• Topside Cover Plate: 8.5 inch L x 3.5 inch W

This controller kit is also a replacement option for the following Gecko Controllers: BDLYE5K450-H5.5, 0610-221030, 0610-221030, 0602-221022 (IN.XE), 0602-221046 (IN.XE), BDLYE5K450 (IN.YE-5), 0610-221020 (IN.YE-5-H4.0-AMP-GD1), 58-337-1445 (IN.YE-5), 58-337-1454 (IN.YE-5), 3-72-7030 (IN.YE-5), 0602-221015 (IN.XE-5), 5EL-66210 (IN.XE-5), gecko 0610-300005