Aqua-Flo Flow-Master XP2 48Y Spa Pump, by Gecko, 3.0 BHP, 2.0 HP Continuous, 220V, 06120500-2040 (Special Order)

In stock
In stock
SKU
280A
$554.95

Aqua-Flo Flow-Master XP2 Spa Pump, by Gecko.  Rated 3.0 Break Horse Power (BHP), 2.0 Horse Power Continuous (HP), 220V, 2-Speed, 8.4/1.8A, 60Hz, 48-Frame.  OEM part number 06120500-2040.

NOTE: The pump photo shown above only shows one capacitor mounted on top of the motor. We cannot guarantee if the motor that is shipped will have 1 or Dual Capacitor attached to the outside of the motor housing, and at a specific location due to different motor models that are supplied. Make sure there is plenty of room where the spa pump is located for a motor that may have a single of dual motor capacitor on the outside of the motor housing.

SpaGuts P/N: 15-720-0500

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-10 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

This is a Side Discharge Pump with 2.0-inch fittings. Outside thread to outside thread measurement on the pump fittings is approximately 3.0 inches. (Pump Unions sold separately)

Dimensions (Approx.):  15 inches L x 7.75 inches H x 7.5 inches W

Motor part numbers that are normally used for this pump: 5KCP39TN4410AX, T55MWCAT-1180, 5KCP39TNB744X, T55CXBMM-986, T55MWBLR-968

Also known as pump model 06120500-2.

The pump image shows the pump discharge on top pointing to the 12 o'clock position.  The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor.  The pump intake (suction) is located in the front center face of the pump.

This pump is also the replacement option for the following spa pump part numbers:  Wavemaster 71699 or Wavemaster 7000 or Wavemaster 36675 (1.65HP - single speed, 220V Configuration ONLY), 06120000-1040, XP2632022, 1-00-0144A, 1-00-0144, 06620390-2, 06120007-2, 06620876-1 Baja Spas, 06120453-2, 06620321-2, 06120812-1 Jacuzzi, 06620786-2, 06620399-2 Diamante Spas, 06620342-2 Sonoma Spas, 06620003-2, 06620489-2, 06620345-1, 06120681, 06620608-1, 06120070-1 , 06120, 06620, T55CXBRF, 06620764-1, 06120500-2, 06620776-2, 06620339-1 Emerald Spas, 06620509-2, 06620768-2 Thermo Spas, 06620168-1, 06620776-1, 06620000-1, 06120181-1, 06620500-2, 06120500-2040, 06620031-1, 06620485-2, 06620454-2, 06620831-1, 06620514-2, 06620001-2, 06120608, 06620459-2, 06620788-2, 06620311-2, 05620489-2, 15-200-0500, 186540-01 (Motor Only), 91041610-000 (Wet End ONLY), T55MWCFR-1288 (Motor ONLY; Verify WetEnd), 06520500-2 (1-Speed, 3.5 SPL), 05620007-2 (2-Speed), 91231606 (Suction Cover, Faceplate)

This XP2 Pump is also the replacement option for the "Relia-Flo" pumps by Caldera Spas.  Verify motor amp rating and voltage, the pump discharge type and size fitting to match.  Note that the new motor will not have the cover with heat vent connection. The original motor cover with heat vent connection may be used on the new motor if it fits, otherwise retrofitting a heat vent is required.  Replacement option for the following pump model numbers: Watkins 6500 Jet Pump, C55MWKBT4824 (1.5HP 230V; MUST confirmed Pump Wet End)

This item comes with a 2-year manufacturer's limited warranty.

Write Your Own Review
You're reviewing:Aqua-Flo Flow-Master XP2 48Y Spa Pump, by Gecko, 3.0 BHP, 2.0 HP Continuous, 220V, 06120500-2040 (Special Order)
Your Rating
Contact Us