Topside Command Center with Display, Standard

If you have a pneumatic (air) spa controller with HEATER but would like the convenience of being able to not only control the temperature from a topside control unit, but to also see an LED display of the water temperature, this standard topside command center is for you. This is a must if you have limited access to your spa equipment or if you would prefer not getting out of the hot tub every time you want to adjust the temperature. This topside WILL NOT work with the Heat Recovery Control unit from TecMark.

SpaGuts P/N:

• 30-200-1016, 110V, 2-Button, 6ft Cord with 6ft Sensor
• 30-100-1005, 110V, 3-Button, 6ft Cord with 6ft Sensor
• 30-200-2010, 110V, 4-Button, 6ft Cord with 6ft Sensor

• 30-200-1017, 220V, 2-Button, 6ft Cord with 6ft Sensor
• 30-200-2005, 220V, 3-Button, 6ft Cord with 6ft Sensor
• 30-200-2011, 220V, 4-Button, 6ft Cord with 6ft Sensor

• 30-200-2018, 110V, 2-Button, 10ft Cord with 6ft Sensor
• 30-200-2006, 110V, 3-Button, 10ft Cord with 6ft Sensor
• 30-200-2012, 110V, 4-Button, 10ft Cord with 6ft Sensor

• 30-200-2019, 220V, 2-Button, 10ft Cord with 6ft Sensor
• 30-200-2007, 220V, 3-Button, 10ft Cord with 6ft Sensor
• 30-200-2013, 220V, 4-Button, 10ft Cord with 6ft Sensor

• 30-200-2020, 110V, 2-Button, 25ft Cord with 25ft Sensor- CALL TO PLACE ORDER, WAIT 1-2 MONTH
• 30-200-2008, 110V, 3-Button, 25ft Cord with 25ft Sensor - CALL TO PLACE ORDER, WAIT 1-2 MONTH
• 30-200-2014, 110V, 4-Button, 25ft Cord with 25ft Sensor - CALL TO PLACE ORDER, WAIT 1-2 MONTH

• 30-200-2021, 220V, 2-Button, 25ft Cord with 25ft Sensor - CALL TO PLACE ORDER, WAIT 1-2 MONTH
• 30-200-2009, 220V, 3-Button, 25ft Cord with 25ft Sensor - CALL TO PLACE ORDER, WAIT 1-2 MONTH
• 30-200-2015, 220V, 4-Button, 25ft Cord with 25ft Sensor - CALL TO PLACE ORDER, WAIT 1-2 MONTH

Standard Dimensions (Approx): 6.50 inches L x 3.25 inches W x 4.50 inch D

Your choice of 2, 3 or 4 buttons. Manufactured by TecMark. Comes with a 2-year manufacturer's warranty.

Keep in mind that most Original Command Centers are rated 110 or 120 volts. Verify off the original topside label or take voltage measurement off the 6-pin receptacle from the controller box for voltage rating. Newer model Topside Command Centers will only have 5-pin plugs as shown in photo, which will work fine on a 6-pin receptacle. The 5-pin plug style is UL approved for safety standards.

Need a replacment thermowell for your topside command center temperature sensor 5/16 inch probe?

NOTE 1: This topside command center only works with pneumatic (air) type controllers that is topside ready with a 6-pin receptacle installed. This topside WILL NOT work with the Heat Recovery Control unit from TecMark.

NOTE 2: This topside command center has an LED display that also needs constant power to the display at all times in order for the thermostat to work. If the LED display version is replacing an old topside command center that has no LED display, customer MUST be willing to re-wire the main controller box to provide constant power to the new topside with LED display.

NOTE 3: A few controllers out there are pre-wired for a topside command center with no display. Customer MUST be willing to re-wire the main controller box to provide constant power to the new topside with LED display. Normally this is determined by having to turn on the blower circuit in order to get the LED display to light up.

NOTE 4: Topside Command Centers with 25-foot cord and sensor may have a lead time of between 4 to 8 weeks before shipping if they are not in stock. These are limited to stock due to low sales volume.

Replacement option for the following topside panels: CC2-120-06-1-00 or CC2-120-06-X-00 (see Note 2 and 3), CC2-240-06-1-00 or CC2-240-06-X-00 (see Note 2 and 3), 3-10-0040 or CC2-120-10-1-00 or CC2-120-10-X-00 (see Note 2 and 3), CC2-240-10-1-00 or CC2-240-10-X-00 (see Note 2 and 3), CC2D-120-06-1-00, CC2D-120-06-X-00, CC2D-240-06-1-00, CC2D-240-06-X-00, 3-10-0043, CC2D-120-10-1-00, CC2D-120-10-X-00, CC2D-240-10-1-00, CC2D-240-10-X-00, CC2-120-25-1-00 or CC2-120-25-X-00 (see Note 2 and 3), CC2-240-25-1-00 or CC2-240-25-X-00 (see Note 2 and 3), CC2D-120-25-1-00, CC2D-120-25-X-00, CC2D-240-25-1-00, CC2D-240-25-X-00, CC3-120-06-1-00 or CC3-120-06-X-00 (see Note 2 and 3), CC3-240-06-1-00 or CC3-240-06-X-00 (see Note 2 and 3), 3-10-0041 or CC3-120-10-1-00 or CC3-120-10-X-00 (see Note 2 and 3), CC3-240-10-1-00 or CC3-240-10-X-00 (see Note 2 and 3), CC3D-120-06-1-00, CC3D-120-06-X-00, CC3D-240-06-1-00, CC3D-240-06-X-00, 3-10-0044, CC3D-120-10-1-00, CC3D-120-10-X-00, CC3D-240-10-1-00, CC3D-240-10-X-00, CC3-120-25-1-00 or CC3-120-25-X-00 (see Note 2 and 3), CC3-240-25-1-00 or CC3-240-25-X-00 (see Note 2 and 3), CC3D-120-25-1-00, CC3D-120-25-X-00, CC3D-240-25-1-00, CC3D-240-25-X-00, CC4-120-06-1-00 or CC4-120-06-X-00 (see Note 2 and 3), CC4-240-06-1-00 or CC4-240-06-X-00 (see Note 2 and 3), 3-10-0042 or CC4-120-10-1-00 or CC4-120-10-X-00 (see Note 2 and 3), CC4-240-10-1-00 or CC4-240-10-X-00 (see Note 2 and 3), CC4D-120-06-1-00, CC4D-120-06-X-00, CC4D-120-06-B-00, CC4D-240-06-1-00, CC4D-240-06-X-00, 3-10-0045, CC4D-120-10-1-00 or CC4D-120-10-X-00, CC4D-240-10-1-00, CC4D-240-10-X-00, CC4-120-25-1-00 or CC4-120-25-X-00 (see Note 2 and 3), CC4-240-25-1-00 or CC4-240-25-X-00 (see Note 2 and 3), CC4D-120-25-1-00, CC4D-120-25-X-00, CC4D-240-25-1-00, CC4D-240-25-X-00, CC4D-120-06B-00, 34-0039A-S, 34-0039D-S, 34-0037A-S, 34-0037D-S, CC4D-240-10I-00, 30-100-1005A (Topside Panel Only NO LABEL), 30-100-1007 (Topside Panel Only NO LABEL), 30-100-1009 (Topside Panel Only NO LABEL), 30-100-1038 (Topside Panel Only NO LABEL), 30-100-1037 (Topside Panel Only NO LABEL)