Uni-Might Circulation Pump, 1/8 HP, 220V, 0.8A (DISCONTINUED; SEE REPLACEMENT LINK)

This is a 24 hour Uni-Might circulation pump, with 48-frame AO Smith motor (Century Laser), and a hi-flo side discharge wet end for optimum flow. Delivers 40 gpm to maintain strong water flow, 1/8 HP, 220V, 0.8 amps, viton seal for maximum leak protection. Compatible with Spaguts controllers and many other brand controllers.

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE LINKS BELOW TO ALTERNATIVE REPLACEMENT OPTIONS THAT REQUIRES REPLUMBING. YOU MAY ALSO CONTACT US IF YOU NEED HELP TO DETERMINE ALTERNATIVE REPLACEMENTS.

OPTION 1:  SEE LINK TO THE 15-973-0153 LX SPA CIRC PUMP 110/220V AS AN ALTERNATIVE REPLACEMENT OPTION THAT REQUIRES REPLUMBING.

OPTION 2:  SEE LINK TO THE 15-720-0022 AQUA-FLO CIRC MASTER CMHP 220V AS AN ALTERNATIVE REPLACEMENT OPTION THAT REQUIRES REPLUMBING.

SpaGuts P/N: 15-350-1002

Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings).

Replacement Option for the following part numbers: 3410020-0X, 341002A-0X, 3410020-0X86

Also a great replacement for the following Aqua-Flo's 1/15 HP FMVP circulating pumps with the same voltage rating: 1-00-0244 (with Mounting Bracket), 1-05-0398 or 91040910 (Wet End Only; with Mounting Bracket), 00710003-2 (with Mounting Bracket), PMPNA02 (Thermo Spa; with Mounting Bracket), 3410020-1X

Dimensions (Approx): 11 inches long, 8.25 inches high, 6.5 inches wide.

Motor part numbers that are normally used for this pump: K55MYGRD-8367, 9352-9303-A, K55MYHFR-8633

The pump image shows the pump intake and discharge on top pointing to the 12 o'clock position. The pump intake and discharge can be rotated every 90-degrees (3, 6 or 9 o'clock positions). Loosen the four long bolts at the back of the motor to rotate the pump discharge. Loosen the four bolts at the front end of the wet end to rotate the pump intake.

This item comes with a one year limited warranty.