This acrylic plate can be used to cover an existing topside hole cut out that is less than 8.5 inches x 3.5 inches and is pre-cut to fit SpaGuts brand CS and CY Series Electronic Topside Panels. ... More
Standard screw on heater unions that attach to Heater Manifold for connection to direct size plumbing. Comes with fitted rubber o-ring gaskets to prevent leakage. Available for both 1.5 and 2.0 ... More
Motor mount helps your old spa feel and sound new again.
SpaGuts P/N: 40-350-2225
Dense 3/4 inch rubber dampens motor noise and significantly reduces motor
vibration caused by large ... More
Four-foot ozone cord with color-coded Mini J&J plug to fit SpaGuts or
other controllers that accepts this type of plug. If this is for your
original ozonator, check the plug configuration for ... More
SpaGuts Replacement Fuse Set for the CS-Series Electronic Controllers.
SpaGuts P/N: 40-150-2023
Fuse Set Includes:
TWO 25A Buss Fuse, 1.5in x 3/8in (Approx), 40-199-2025
... More
Replacement circuit boards for SpaGuts brand CS-Series Electronic
Controllers. Choose the correct circuit board for the SpaGuts brand
Electronic Controller and Topside Panel that you have. If ... More
Barb Hose fitting for Waterway brand pumps. Barb fitting is
for a 3/8 inch hose or tubing. This barb hose fitting has a 1/4 inch MPT
(Male Pipe Thread) that screws into the drain plug threaded ... More
This bathtub water-level sensor ensures that the bathtub pump will not operate unless the water
level is high enough to prevent the jets from squirting water out of the tub, and to prevent a long ... More
Replacement 2.0 inch heater o-ring gaskets. This order is for a quantity
of 12 pieces.
SpaGuts P/N: 53-200-1000
NOTE that the provided o-ring gaskets may be clear, white or black in ... More
Replacement Balboa Temperature Sensor with 96 inch cable, and 3/8 inch sensor bulb. OEM part number 30352KIT. Compatible with Value and LE systems. Not to be used with M7 systems.
SpaGuts ... More
Replacement Cal Spas® Pressure Switch, calibrated at 2.0 PSI for 5 & 6 HP Pumps. OEM part numbers ELE09500204 and 4037P.
ALSO SEE PRESSURE SWITCH ... More
Replacement pump wet end faceplate for the Waterway Executive Pump model. This faceplate has a 2.5 inch intake. Fits on the 48Y and 56Y frame Waterway Executive pump models. OEM part number ... More
Flow Switch on 3/4" Barb Tee Fitting. Includes 22AWG 6ft Cable with 3-Pin Plug that connects directly to an SSPA circuit board.
SpaGuts P/N: 45-150-0217
Optional replacement for the ... More
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.
