Get The Grit While You Sit!
If you own a spa, you know just how annoying those little particles at the bottom of the spa can be
and how difficult they are to get out. Whether it is dirt tracked ... More
The easiest ozone injector installation is to attach the ozone saddle clamp to the vertical venturi tube in your spa just below the water line. Works with spas that have air venturi injectors. ... More
Small cracks and holes in your spa shell can be easily fixed with this acrylic repair kit.
The kit contains a high-strength, gap-filling adhesive that is perfect for creating a tough waterproof ... More
This Electronic Topside Extension Cord is ONLY for Spaguts CS Series brand
Electronic Topsides. Available in 9ft or 25ft (Approximate). Keep in mind that the
topside cable can only be at a ... More
This Universal Pressure Switch fits all major brands of spa controllers
that has a Pressure Switch installed on the heater. Model SG-3903.
1 amp at 120 VAC (inductive), 72 VA pilot duty at 24 ... More
Replacement Hi-Limit Switch for your SpaGuts brand
Pneumatic Controllers.
SpaGuts part numbers (Dimensions are approximate):
25-150-1035, 24" cap, 2.75" x 5/16" Bulb
25-850-1031, ... More
Pair of internal buss fuses for your SpaGuts brand Controllers. Can be
used on other systems that require a time delaying 25 or 30 amp current
limiting 480VAC 300VDC Class G Buss ... More
Replacement Shaft Seal Kit for Waterway Brand Pumps, type PS1000. Seals are carbon ceramic with Viton® elastomers for long-lasting performance, easily enduring prolonged heat and chemical exposure. ... More
Four-foot Accessory cord with color-coded Mini J&J plug to fit SpaGuts or
other spa controllers that uses the same type of plug connection. This
cord is typically
used for Accessory, Light or ... More
Hydro Quip replacement transformer for the SSPA model circuit boards, rated 220V. OEM part number 37-0051A.
NOTE: THIS ITEM IS OBSOLETE, NOT AVAILABLE ANYMORE.
SpaGuts P/N: ... More
Equipment Skid Base with dimensions of 1.0 inch thick x 15.25 inch width x 26.25 inch long. Normally used for mounting a spa controller, one spa pump and an air blower. Black in color.
SpaGuts ... More
Replacement O-Rings for 2 inch Pump Unions. Comes in a quantity of 12 pieces.
SpaGuts P/N: 15-200-0029
NOTE: A 2.0 inch pump union assembly have an approximate 3.1 inch union nut ... More
Replacement O-Rings for Pump Unions, 1.5 inch. Comes in a quantity of 12 pieces.
SpaGuts P/N: 15-200-0026
Replacement O-ring for the following part numbers: 805-0226, 806105129598, ... More
Replacement spa component cord with 4-Prong Amp Plug. Also known as the
male amp cord. This cord is 8 foot long, with 14 AWG, 4-wire. This cord
is mainly used for a dual speed pump with max amp ... More
Replacement Overlay for SpaGuts 4-Button Small Topside Panel, CS-Series. Fits on K-18 or TSC-18 Topside Panels.
SpaGuts P/N: 30-125-1050
Buttons: Jets-Blower-Light-Temp
This item ... More
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.
