Gecko Topside, TSC-8, K-8-SL-GR-ADB-PPD, w/ 8-Btn and 7-Btn Overlays, 0200-007194 (SPECIAL ORDER)

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-10 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

Replacement Gecko and Spa Builders Topside Panel, model TSC-8, Option K-8-SL-GR-ADB-PPD, with 8-Button and 7-Button Overlays. OEM part numbers 0200-007194. This topside comes with a 10ft cord that uses an 8-pin connector.

SpaGuts P/N: 30-850-7221

Button Configuration: (Top Left to Right) Pump1, Pump2, Blower, Light.(Bottom Left to Right) On/Off, Filter, Temp Up, Temp Down.

Topside Dimension (Approx): 7.0 inch x 3.25 inch

This topside panel is a also a replacement option for the following part numbers: 3-00-7221, BDLTSC8GE1, 3-05-7097 (Overlay only), 9916-100130 (Overlay only), 58-337-1568, 0200-007072, 9735-261, 9735-271, TSC-14 PAK-112500 (Confirm Button Layout to Match, Artic Spas), 0200-007080, 0200-007096, 0201-007156 TSC-56 (Confirm Button Layout to Match, Paragon Spas), TSC-70 or K-70 or 0201-007192 (Confirm Button Layout to Match, Saratoga Spas), K-8-8K (Must Confirm Button Layout), BDLTSC8GE2 (7-Button Topside Panel), 30-720-0807, 3-05-7011 (Overlay only), 9916-100331 (Overlay only), 58-337-1566, 0202-007081, 3-00-7100, 3-00-7126, 30-720-0807, 58-337-1566, 9916-100331, K-16, K-52, K-8, TSC-52, TSC-8-GE2, 9735-262, 9735-278, 0201-007016

Replacement Option for the K-16 or TSC-16 Model Topsides, which are oval in shape and the 0200-007113 K-8 Topside Panel (No Overlay). Verify hole size for fitment, and button configuration to make sure they are laid out the same.

This is also a replacement option for the K-52 or TSC-52 Model Topsides, which are oval in shape. Verify hole size for fitment, and button configuration to make sure they are laid out the same. Note that the K-8 Topside will allow the buttons to work properly on the left hand side of the display, where as the K-52 Topside has the buttons on the right hand side of the display.

This item comes with a one year limited warranty.

NOTE: Make sure this is the correct topside panel with the same model number, button configuration and cable connector prior to purchasing.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards.