Advanced electronics! Water Resistance! WIFI control from your iPhone! Aeware by Gecko IN.YE-5-H4.0, aka Y-Series, Controller Kit with Topside Panel IN.K450. Application is 220V 60Hz Power Supply (4-Wire required for 220V). Setup to operate Pump1, Pump 2, Blower/Pump 3, Ozone and Circ Pump. Heater is 4.0KW on 220V application. Available as a Field Configurable Kit, or Factory Configured (Plug-N-Play)!
PLEASE NOTE THAT FACTORY CONFIGURATION IS CURRENTLY NOT AVAILABLE FOR THIS CONTROLLER KIT. PLEASE SELECT FIELD CONFIGURABLE KIT WHEN ADDING TO CART.
SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 30-40 BUSINESS DAYS LEAD TIME BEFORE SHIPPING (LONGER LEAD TIME DUE TO COVID-19). SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.
SpaGuts P/N: 10-720-5450
IN.YE-5-H4.0 Controller with 4.0KW Flo-thru Heater, 0610-221046-355
TWO Amp Cords, 2-Speed, 14 AWG, 4-Wire, 4ft, 95100519
TWO Amp Cords, 1-Speed, 14 AWG, 3-Wire, 4ft, 95100517
Light Cable with Socket, 8ft, 9920-400489 (40-175-9912 Light Bulb Sold Separately)
Pair of 2 inch Heater Split Nuts, Heater Tailpieces and O-ring Gaskets
Topside Cover (Adapter) Plate, 8.5" x 3.9", 9917-102123
Supplemental Installation Instructions (Included and also available online. See Tabs Above)
Quick Start Card (Included and also available online. See Tabs Above)
System Flyer (Only Available Online. See Tabs Above)
Tech Book (Only Available Online. See Tabs Above)
220V 60Hz Power Supply
Pump 1, 1 or 2-Speed, 110V/220V, 15A Max*
Pump 2, 1 or 2-Speed, 110V/220V, 15A Max*
Blower/Pump3, 1-Speed, 110V/220V, 15A Max*
Ozone, 110V/220V, 6A Max*
Circ Pump, 110V/220V, 6A Max*
Direct (Audio/Video), Constant 110V/220V, 10A Max*
Light, 12V, 12W (1 Intensity), 1A Max*
*NOTE: SEE SYSTEM FLYER FOR AMP RATING LIMITATION
220V Power requires 2 Hots, Neutral and Ground
The 4.0KW Hi-Flo Heater requires a Minimum of 20 GPM of Water Flow, and Minimum 1.5" Plumbing
Advanced electronics! Water Resistance! (Upon proper installation, and a water-tight power supply clamp is used)
In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
In.seal - Watertight Protection - In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components.
In.kin - Kinetic Heat Monitoring - First ever UL approved kinetic heating protection manages water temp. increase generated by pump heat dissipation. Hardware protection shuts all accessories off if it senses water overheat.
In.flo - Dry-Fire Protection - A new heater safety system located in the in.therm power box - an all-electronic dry-fire protection.
In.t.cip - Water Temperature Algorithm - In.t.cip is an intelligent water temp. refresh algorithm that calculates optimal time to start pumps and get water temp. readings. In.t.cip continuously readjusts heater start time.
In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to in.ye and contains data to program or configure its system. In.ye executes the data upload automatically.
Field-Serviceable Parts - The Y Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.
WIFI Optional (Sold Separately):
iPhone App! Control your spa from your iPhone, iPad, or iPod!
Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and
control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!
(*iPhone, iPad, iPod and computer are not included)
Controller: 17.38" L x 11.2" H x 5.37" W
Heater: 15" L x 2" Diameter
Topside Panel: 7.06" L x 2.81" W
Topside Cover Plate: 8.5" L x 3.5" W
This controller kit is also a replacement option for the following Gecko Controllers: 0610-221020 (IN.YE-5), 0602-221022 (IN.XE), 0602-221046 (IN.XE), BDLYE5K450 (IN.YE-5), 0610-221020 (IN.YE-5-H4.0-AMP-GD1), 58-337-1445 (IN.YE-5), 58-337-1454 (IN.YE-5), 3-72-7030 (IN.YE-5), 0602-221015 (IN.XE-5), 5EL-66210 (IN.XE-5), 0202-205038, 3-72-7079, 0202-205013, 0202-205034, 0602-221013 (IN.XE), 0202-205162 (S-Class), 0202-205163 (S-Class), 3-72-7036 (S-Class, 4.0KW), 3-72-7078 (S-Class), 0202-205104 (S-Class), 3-72-7034 (S-Class), 10-720-5162 (S-Class, No Topside), 3-72-7014 (S-Class), 0610-300003 (IN.YE-5), 0610-221002 (IN.YE-5)
This item has options that require your selection below. Please make a selection for each option
Hover on Learn More to read about the respective option.
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.