Advanced electronics! Water Resistance! WIFI control from your iPhone! Aeware by Gecko IN.YE-5-H5.5, aka Y-Series, Controller Kit with Topside Panel IN.K200-2OP. Application is 110/220V 60Hz Power Supply (4-Wire required for 220V). Setup to operate Pump1, Blower/Pump2, Ozone and Circ Pump. Heater is rated 1.375KW on 110V application, or 5.5KW on 220V application. Available as a Field Configurable Kit, or Factory Configured (Plug-N-Play)!
SpaGuts P/N: 10-720-2055
IN.YE-5-H5.5 Controller with 5.5KW Flo-thru Heater, 0610-221066-363
IN.K200-2OP Topside Panel with Overlay, 4-Button, 10ft Cable, 0607-008002
ONE Amp Cord, 2-Speed, 14 AWG, 4-Wire, 4ft, 95100519
TWO Amp Cords, 1-Speed, 14 AWG, 3-Wire, 4ft, 95100517
Light Cable with Socket, 8ft, 9920-400489 (40-175-9912 Light Bulb Sold Separately)
Pair of 2 inch Heater Split Nuts, Heater Tailpieces and O-ring Gaskets
Topside Cover (Adapter) Plate, 8.25" x 3.0", 9917-102053
Supplemental Installation Instructions (Included and also available online. See Tabs Above)
Quick Start Card (Included and also available online. See Tabs Above)
System Flyer (Only Available Online. See Tabs Above)
Tech Book (Only Available Online. See Tabs Above)
110/220V 60Hz Power Supply
Pump 1, 1 or 2 Speed, 110V/220V, 15A Max
Blower/Pump2, 1 or 2 Speed (Only 1 Speed Option for Blower), 110V/220V, 15A Max
Ozone, 110V/220V, 6A Max
Direct (Audio/Video), Constant 110V/220V, 10A Max
Light, 12V, 12W (1 Intensity), 1A Max
*NOTE: THE CIRCULATION PUMP CIRCUIT OPTION IS NO LONGER AVAILABLE ON THIS CONTROLLER KIT. IF A CIRCUIT FOR A SMALL CIRCULATION PUMP IS NEEDED, SEE THE 4.0KW VERSION WITH PART NUMBER 10-720-5202.
220V Power requires 2 Hots, Neutral and Ground
The 5.5KW Hi-Flo Heater requires a Minimum of 25 GPM of Water Flow, and Minimum 1.5" Plumbing
Advanced electronics! Water Resistance! (Upon proper installation, and a water-tight power supply clamp is used)
In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
In.seal - Watertight Protection - In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components.
In.kin - Kinetic Heat Monitoring - First ever UL approved kinetic heating protection manages water temp. increase generated by pump heat dissipation. Hardware protection shuts all accessories off if it senses water overheat.
In.flo - Dry-Fire Protection - A new heater safety system located in the in.therm power box - an all-electronic dry-fire protection.
In.t.cip - Water Temperature Algorithm - In.t.cip is an intelligent water temp. refresh algorithm that calculates optimal time to start pumps and get water temp. readings. In.t.cip continuously readjusts heater start time.
In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to in.ye and contains data to program or configure its system. In.ye executes the data upload automatically.
Field-Serviceable Parts - The Y Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.
WIFI Optional (Sold Separately):
iPhone App! Control your spa from your iPhone, iPad, or iPod!
Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and
control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!
(*iPhone, iPad, iPod and computer are not included)
Controller: 17.38" L x 11.2" H x 5.37" W
Heater: 15" L x 2" Diameter
Topside Panel: 4.75" L x 1.7" W
Topside Cover Plate: 8.5" L x 3.5" W
This controller kit is also a replacement option for the following Gecko Controllers: BDLYE5K200-H5.5, 0610-221030, 0610-221030, 0602-221022 (IN.XE), 0602-221046 (IN.XE), BDLYE5K200 (IN.YE-5), 0610-221020 (IN.YE-5-H4.0-AMP-GD1), 3-72-7031 (IN.YE-5), 3-72-7034 (IN.YE-5), 58-337-1452 (IN.YE-5), 58-337-1445 (IN.YE-5), 0202-205051 (4.0KW), 0202-205212 (4.0KW), 3-73-1750 (4.0KW), 3-72-7060 (4.0KW), 3-73-1755 (4.0KW), BDL2SCTSC9 (4.0KW), 0202-205016 (110V, 1.0KW), 3-72-7021 (4.0KW)
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.