1x Topside Cover (Adapter) Plate for IN.K300, 8.5" x 3.0", 9917-10239
TWO Flat Mounting Plates with Screws, 9920-101490
Quick Start Card
110/220V 60Hz Power Supply (Neutral is Required)
Pump 1 Circuit, 1 or 2-Speed, 110/220V, 15A Max
Optional Circ Pump Circuit, 1-Speed, 110/220V, 2A Max
Ozone Circuit, Dependent with Pump 1 Low Speed, 3A Max (Must be same voltage as Pump 1)
Direct Output Circuit, 110V/220V, 10A Max (Constant Voltage)
Light, 12V, 1 Intensity, 0.5A Max
220V Power requires 2 Hots, Neutral and Ground
The 4.0KW Hi-Flo Heater requires a Minimum of 18 GPM of Water Flow, and Minimum 1.5" Plumbing
Advanced electronics! Water Resistance! (Upon proper installation, and a water-tight power supply clamp is used)
In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
In.seal - Watertight Protection - In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components.
In.flo - Dry-Fire Protection - A new heater safety system located in the in.therm power box - an all-electronic dry-fire protection.
In.t.cip - Water Temperature Algorithm - In.t.cip is an intelligent water temp. refresh algorithm that calculates optimal time to start pumps and get water temp. readings. In.t.cip continuously readjusts heater start time.
In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to in.ye and contains data to program or configure its system. In.ye executes the data upload automatically.
In.touch - Supports in.touch 2 Wifi Interface, allowing you to use your favorite iOS device to communicate with your spa.
Field-Serviceable Parts - The YJ Series provides easy access to the controller board for all maintenance and replacement requirements.
View of 4 button Digital Topside Panel. Click image to enlarge.
Controller: 12.08" L x 7.38" H x 3.74" W
Topside Panel: 6.25" L x 2.25" W
Topside Cover Plate: 8.5" L x 3.5" W
Heater: 15" L x 4.94" H x 3.92" W
WIFI Optional (Sold Separately):
iPhone App! Control your spa from your iPhone, iPad, or iPod!
Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and
control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!
(*iPhone, iPad, iPod and computer are not included)
This controller kit is also a replacement option for the following part numbers: 0612-300001, 3-72-7050, 0612-221012 (Control System), 3-72-7053 (Control System), 58-337-1470, 0612-221002 (Control System), 0607-008036 (IN.K300 Topside Panel)
SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-10 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.