Aqua-Flo Circ Master, FMVP Model, by Gecko, Spa Circulation Pump, rated 1/15 HP, 220V, 50/60Hz, 1425/1725 RPM, 0.63 amps, single speed. OEM part numbers 00710003-2510 and 00710003-2010.
SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 20-40 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.
SpaGuts P/N: 15-720-2510
This is a 24 hour circulation pump, with 48-frame motor, Vertical Suction and Discharge wet end. Delivers 40 GPM to maintain strong water flow, and has a viton seal for maximum leak protection. This circ pump includes the front metal bracket, and a 4ft 4-Prong 3-Wire Amp cord. Compatible with Spaguts controllers and many other brand controllers.
Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings). Pump Unions are sold separately.
Dimensions (Approx): 11.5 inches long, 8.25 inches high, 6.5 inches wide.
Motor part numbers that are normally used for this pump: K55MYGRD-8367, 9352-9303-A
This pump is also a replacement option for the following part numbers: 1-00-0244, 1-05-0398 or 91040910 (Wet End Only), 00710003-2, PMPNA02 (Thermo Spa)
The pump image shows the pump suction and discharge are pointing up to the 12 o'clock position. The pump suction and discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor for the discharge, and the front four bolts for the suction. The pump intake (suction) is located in the front of the pump.
This item comes with a one year manufacturer's limited warranty.
NOTE: The 110V version is obsolete. If power to the spa is 220V 4-wire, then the circ pump circuit within the controller can be converted to 220V to operate this circ pump. Or just use P/N 15-350-1003 as the alternative replacement.