Aqua-Flo Flow-Master XP2 Spa Pump, by Gecko. Rated 2.0 Break Horse Power (BHP), 1.5 Horse Power Continuous (HP), 110V, 2-Speed, 13.3-15.0/3.9A, 60Hz, 48-Frame. OEM part number 06115000-1040.
NOTE: The pump photo shown to the right only shows one capacitor mounted on top of the motor. We cannot guarantee if the motor that is shipped will have 1 or Dual Capacitor attached to the outside of the motor housing, and at a specific location due to different motor models that are supplied. Make sure there is plenty of room where the spa pump is located for a motor that may have a single of dual motor capacitor on the outside of the motor housing.
SpaGuts P/N: 15-720-1500
This is a Side Discharge Pump with 2.0" fittings. Outside thread to outside thread measurement on the pump fittings is approximately 3.0". (Pump Unions sold separately)
Dimensions are approximately 15.5 inches long, 7.75 inches high, 7.25 inches wide.
The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.
Motor part numbers that are normally used for this pump: T55MWCBP-1197
Also known as pump model 06115000-1.
This pump is also a replacement option for the following spa pump part numbers: 06615686-2, 06115, 1-00-0133, 06115484-2, 06615763-1, 06115511-2 (Coleman Spa), 06615607-1, 630-6087, 101293, wavemaster 4000 (1.0HP -Verify if old system can handle the 15A motor), wavemaster 7000 or wavemaster 36675 (1.65HP - single speed, 110V Configuration ONLY), 06615890-1, 06115319-2, 06118437-2 (Bull Frog Spa), 06615456-2, 06617763-2, 06118371-2, wavemaster 71699 or wavemaster 7000 or wavemaster 36675 (1.65HP - single speed, 110V Configuration ONLY), 06115007-5, 15-200-1500, 06117849-1 (Watkins 39583), Watkins 39583, Bullfrog 65-1315, Bullfrog 65-1945, 06515880-1 (230/115V; MUST confirmed voltage configuration), 7-177615-02 (230/115V Motor ONLY; MUST confirmed voltage configuration, and Pump Wet End Model), 06015423-2 (1.5HP 230/115V; MUST confirmed voltage configuration), 7-182688-02 (230/115V; Motor Only; MUST confirmed voltage configuration), Wavemaster 6000, Watkins 38944, 06115852-1 (Watkins), 06115-115, 05515661-1 (1.5HP 230/115V; MUST confirmed voltage configuration), 06016158-1 (Watkins 1.65HP), 06115000-1040B, 91231606 (Suction Cover, Faceplate)
This XP2 Pump is also the replacement option for the "Relia-Flo" pumps by Caldera Spas. Verify motor amp rating and voltage, the pump discharge type and size fitting to match. Note that the new motor will not have the cover with heat vent connection. The original motor cover with heat vent connection may be used on the new motor if it fits, otherwise retrofitting a heat vent is required. Replacement option for the following pump model numbers: 72201, 06117849-1, 06115733-1, 06115185-1, 72463, 06110731-1, 061158521
This item comes with a two year manufacturer's limited warranty.