Balboa Topside Kit, E5 Sup Duplex, VL402, 54107 (SEE REPLACEMENT LINK)

THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER. PLEASE SEE ALTERNATIVE REPLACEMENT OPTIONS BELOW:

OPTION 1: SEE LINK TO THE 30-200-1248 BALBOA TOPSIDE KIT WITH LED DISPLAY. THE BUTTONS HAVE THE SAME TEXTS AS THE ORIGINAL, JUST IN DIFFERENT LOCATION. IT WILL STILL OPERATE THE TWO PUMPS, LIGHT AND SET FUNCTIONS WITHOUT A PROBLEM.

Replacement Balboa Topside Kit, Duplex Digital, with LCD display, 4-button, model VL402 SUP DUP E5. OEM part number 54107.

SpaGuts P/N: 30-200-4107

Button Configuration: 4-button (Jet2-Light-Jet1-Set)

This topside panel uses an 8-wire phone-type RJ45 plug with 7ft cord.

Topside dimension (approx): 7.31 inch x 3.25 inch

This topside panel also replaces the following topside part numbers: 51876 (7ft Cable, No Overlay), 53689 (Sunval), 11623 (Overlay ONLY), MAS225 or X310850 or 51787 (No Overlay), X506000 (Overlay Only), 54093 (Jet2 button replaces Blower button), 53604 (Rocky Spa), 53604 (Sunval, verify button layout), 52492 (HP2000, verify button layout), 10668 (Overlay ONLY; has Blower button instead of Jet2)

NOTE 1: A standard 51876 Topside (Panel Balboa VL402 SUPDUP E5 No O/L) with a 10764 overlay will be provided in a clear sealed bag.

This item comes with a 1-year limited warranty.

NOTE 2: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards.