Replacement Balboa Topside Kit, 4-Button Mini Oval VL200
model with LCD display. OEM part number 52144. This topside panel
only works with Balboa VS 501Z, VS 500z and VS 300Z model spa controllers.
THIS ITEM IS CURRENTLY OUT OF STOCK. ESTIMATED IN STOCK DATE IS 2/26/2021. IF YOU WOULD LIKE TO PUT IN THE ORDER NOW TO HOLD YOUR PLACE IN LINE FOR SHIPMENT WHEN THE PART ARRIVES BACK IN STOCK, PLEASE GIVE SPAGUTS SALES A CALL AT 714-764-0013.
SpaGuts P/N: 30-200-2144
Button Configuration: 4-Button (Blower, Jets, Temp, Light)
This topside panel uses a phone-type connector, 8-wire, with 7ft cord.
Topside dimension (Approx): 4.3 inch x 1.6 inch
This topside panel is also a replacement option for the following Topside part numbers: 53280 (Panel Balboa E4 Mini Bath VL200 No O/L; Verify Button Layout), 55472 (Clear Trim, No Overlay; Verify Button Layout), 54252 (10ft Cable, No Overlay, requires extension cord; Verify Button Layout), 34-52144-K, 34-52144, 52267-01 (No Overlay; Verify Button Layout), 163742 (No Overlay; Verify Button Layout), 55654 (10ft Cable, No Overlay, Verify Button Layout)
NOTE: A standard Mini Oval topside panel (an overlay may already be applied) and a separate 11095 4-button overlay will be provided in a clear sealed bag.
This item comes with a 1-year limited warranty.
If a longer cord is needed,
Click here to see available
extension cords.
NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.
