Replacement Balboa Topside Kit, 7-Button with LCD display, model ML700 or ML600 E8. OEM part number 55609. This topside panel is normally used with the Balboa EL and GL Mach3 spa control systems. This topside is updated with a new LED light board.
SpaGuts P/N: 30-200-9853
Button Configuration: 7-Button; (Top Row) Time-Warm-Light-Blower; (Bottom Row) Mode-Cool-Jets
This topside panel uses a Molex-type connector, 8-wire, with 7ft cord.
Topside dimension (Approx): 9.75 inch x 3.125 inch
This topside kit is also a replacement option for the following topside part numbers: 52798-01 (No Overlay, Obsolete), 34-55609-K
NOTE: A standard 50563 topside (Panel Balboa ML700 LED No O/L) with 12053 overlay will be provided in a clear sealed bag.
This topside panel will have a casing assembly 33506 (Assy Panel ML700 LED).
This item comes with a 1-year limited warranty.
NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.