The Balboa VS510SZ Spa Control System with 5.5KW Heater is field configurable. Internal component circuits can be setup to work with your existing pumps, blower and ozone. OEM part number for this system is G5154.
An option only available from SpaGuts, this VS Series is available Factory Configured to your exact specifications or as a Retrofit Kit that is easily field configured at the time of installation. Competitors only offer controllers as a Retrofit "do it yourself kits" without the time saving Factory Configuration optionally available by SpaGuts. Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower, ozone and circulation pump so you don't have to do any internal wiring or programming, making your controller plug and play right out of the box. Best value for most installers; saves time and prevents costly installation errors. Factory Configuration Fee of $29.95 may be requested when placing the order over the phone.
SpaGuts P/N: 11-175-4371
This controller operates on 220V (requires 4-wire service). The VS510SZ controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.
- Pump 1 circuit, Two speed, 110/220V, 12A Max
- Pump 2 circuit, One speed, 110/220V, 12A Max
- Blower or Pump 3 circuit, 1-speed, 110/220V, 10A Max
- Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
- Ozone circuit, 110/220V, 1A Max
- Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
- 12V Light circuit, 1A Max
- 5.5KW, 240V Flo-Thru Incoloy High Flow heater with M7 technology
- Stainless steel heater housing
- Plug-N-Click Heater Power Cables
- Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
- No Pressure Switch. Heater can be installed on suction or
discharge side of pump
- UL Recognized for your safety
- Freeze protection
- High-limit protection
- Filtration mode
- Economy Mode
- 1-Year Limited Warranty (Extended Warranty Option is available upon ordering)
Controller Dimensions (Approx): 12" L x 11" H x 4.5" W
Heater Dimensions (Approx): 15" L x 2" Diameter
This controller system is also a replacement option for the following control systems: 54218-Z, 54371HC1, 54371-01, 54344-01, 58-138-2050, BAL54218, 9790-010, 3-70-0803, 3-70-0931HQ, CS6230B-UZ-WP, 54371HC3, KT-UNIVCC, 54757 (model K211D4K, 4.0KW), 55196 or GSV500SZ (New System will Not support Silent Sentry Lights), 53600-02 (VS510S), EP6551-2-3 controller, 54559-02 or G4154 Control System (Plug-N-Click 4.0KW Heater Version), 54371-03 Control System (5.5KW Heater Version)
Also see the SpaGuts brand VS510SZ Single Pump Spa Controller w/ Topside, 54802.
It is built by Balboa and offers a better value with an upgraded topside and a 2 year warranty!