The Balboa Spa Controller VS510SZ Kit is configurable. Internal component circuits are setup to work with your existing pumps, blower and ozone, so you don't have to do any internal wiring. Replacement for the 54218-Z Balboa Spa Controller Retrofit Kit.
An option only available from SpaGuts, this VS Series is available Factory Configured to your exact specifications or as a Retrofit Kit that is easily field configured at the time of installation. Competitors only offer controllers as a Retrofit "do it yourself kits" without the time saving Factory Configuration optionally available by SpaGuts. Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower, ozone and circulation pump so you don't have to do any internal wiring or programming, making your controller plug and play right out of the box. Best value for most installers; saves time and prevents costly installation errors. Factory Configuration Fee of $29.95 may be requested when placing the order over the phone.
SpaGuts P/N: 11-200-4218
This controller operates on 220V (requires 4-wire service). The VS510SZ controller is equipped with M7 technology which allows the heater to be mounted either on the suction or discharge side of the pump.
Pump 1 circuit, Two speed, 110/220V, 12A Max
Pump 2 circuit, One speed, 110/220V, 12A Max
Blower or Pump 3 circuit, 1-speed, 110/220V, 10A Max
Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
Ozone circuit, 110/220V, 1A Max
Audio/Video circuit, 110/220V, 2A Max (Constant Circuit)
12V Light circuit, 1A Max
5.5KW, 240V Flo-Thru Incoloy High Flow heater with M7 technology
Plug-N-Click Heater Power Cables
Stainless steel heater housing
No Pressure Switch. Heater can be installed on suction or
1-Year Limited Warranty (Extended Warranty Option is available upon ordering)
Balboa VS510SZ Control System, G5154
Balboa Serial Standard Topside Panel (No Overlay), 54112-01
Balboa Topside Overlay, Serial Standard, 7-Button, 10430
Topside Cover Plate, 10165
Pair of 2.0 inch Heater Tailpieces with O-Ring Gaskets
One Dual Speed Amp Cords, 4-Wire, 48 inch, 15-150-3060
Three Single Speed Amp Cords, 3-Wire, 48 inch, 15-150-0024
Light Cable Harness with Socket, 2-Pin Amp Plug, 8ft, 40-150-1515
Light Bulb, Clear, 7.16W, #918, 65-350-0918
Controller Dimensions (Approx): 12" L x 11" H x 4.5" W
Heater Dimensions (Approx): 15" L x 2" Diameter
Topside Panel Dimensions (Approx): 7.25" L x 3.25" W
Topside Cover Plate Dimensions (Approx): 8.5" L x 3.5" W
Accessorry Bag Contents:
This controller kit is also a replacement option for the following control systems: 54218-Z, 54371HC1, 54371-01, 54344-01, 58-138-2050, BAL54218, 9790-010, 3-70-0803, 3-70-0931HQ, CS6230B-UZ-WP, 54371HC3, KT-UNIVCC, 54757 (model K211D4K, 4.0KW), 55196 or GSV500SZ (New System will Not support Silent Sentry Lights), 53600-02 (VS510S), EP6551-2-3 controller, 54559-02 or G4154 Control System (Plug-N-Click 4.0KW Heater Version), 54371-03 or G5154 Control System (Plug-N-Click 5.5KW Heater Version)
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.