This is a basic "self-control" Baptistry or Baptismal Control System. It consist of a 5.5KW 220V Flo-Thru Heater, an adjustable thermostat, a hi-limit, pressure switch, contactors, and 3-wires to connect to 220V lines. OEM Part number BCS-55-3W.
SpaGuts P/N: 10-150-1055
- Single Phase, 220V (3-Wire), 50/60Hz
- 5.5KW 220V Flo-Thru Heater Assembly
- Stainless Steel Heater Housing
- Full Range Thermostat (59 to 104 °F)
- High Limit and Pressure Switch Protected
- 2.0" Heater Plumbing Connections with O-Ring Gaskets
- UL Recognized
- Heater "ON" Indicator Light
- "Paint-Lock" rust proof enclosure
- Owners Manual
- Wiring Diagram
- Control Box (Approx): 8.0" L x 5.0" W x 3.0" H
- Heater Assembly (Approx): 13.25" L x 2.0" Diameter
- Overall Height w/Heater on Bottom of Box (Approx): 7.5" H
MOUNTING: This heater unit may be mounted Vertically or Horizontally. Avoid "Tilting" to help prevent air pockets inside the heater that causes heater to burn out.
NOTE: This model heater unit controls only the heater. It does NOT have any component circuits or any plug-in for any components. It also does NOT have a built-in Air Switch or Plug-in for a Pump. Requires a pump to flow water through the heater with minimum 25 GPM, and minimum 1.5 inch plumbing. The pump being used should have it's own control box, or timed controls.
This baptismal heater unit is also a replacement option for the following part numbers: BCS-55, 20-08421, 10-250-8421, C08BK00-0001120, Code HYD0D-1180 (Wiring Diagram), 26-0070-BCS55 (Heater Assembly), 26-0070X-XXX (Heater Assembly UL Model), BES-55 (*Replacement Heater Unit will NOT have Plug-in for Pump OR the Air Switch*)
This item comes with a 1 year manufacturer's limited warranty.