Replacement Hydro Quip Circuit Board, Model Digital MP (M-Class), Universal for 9700 Series Controller, part number 33-0025-R8. This circuit board is programmed for an 8-Key Topside Panel.
SpaGuts P/N: 10-150-0024
This circuit board also replaces the following Hydro Quip circuit boards: 33-0025-R1, 33-0025-R2, 33-0025-R3, 33-0025-R4, 33-0025-R5, 33-0025-R6, 33-0025-R7, 33-0025-R8, 33-0025-K, 33-0027-K, 33-0027-R1, 33-0027, 33-0025A-K, CS9700 (Control System), CS9707 (Control System)
This circuit board is compatible with the (30-150-0190) K-5 10-Button and the (30-200-0191) K-5 8-Button Topside Panels (Field Programming Required), (25-150-2025) 10ft Temperature Sensor, (25-150-2026) 25ft Temperature Sensor, (25-150-0201) 18in Hi-Limit Sensor, (34-0201D-76) 72in Hi-Limit Sensor, and the (95-150-0099) Transformer.
NOTE: If using this circuit board (Revision 8) as a replacement for the older revision circuit board, it may also require replacing the tansformer with correct plug, a compatible flow switch or pressure switch cable with correct plug, and the light cable with correct plug.
This item comes with a one year limited warranty.
When selecting your spa circuit board, it’s critical that you go by part numbers and NOT just by appearances. The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number. Do NOT purchase a hot tub circuit board just because it looks the same OR have the same Model Number as the one you’re replacing. Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels. NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations. If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup. Replacement spa circuit boards are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct circuit board was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa circuit boards.
CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.