Hydro Quip's outdoor rated electronic spa controller with 11KW Heater, powered by Gecko. This controller will operate up to 3 pumps and a blower, and provides fast heat. This controller is designed to be mounted outdoor in the elements and is housed in a weather tight metal box. The metal box is made of strong cold rolled steel and triple powder coated for maximum protection.
THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER.
PLEASE SEE THE CS8800-A MODEL AS THE REPLACEMENT OPTION.
SpaGuts P/N: 10-150-8600
- 220V 60Hz Single Phase
- 110/220V Component Circuits, 30-40A (40/50A Service Required)
- 220V 11KW Heater, 46A (Additional 60A Service Required)
- Pump One and Pump Two circuits up to 2 speeds, 110/220V, 15A Max
- Pump Three circuit at single speed, 110/220V, 15A Max
- Blower circuit up to three intensity, 110/220V, 8A Max
- Ozone circuit 110/220V, 2A Max
- Circulation Pump circuit 110/220V, 24hr, single speed, Filtration Only, 5A Max
- Auxiliary circuit, 110/220V constant, 5A Max
- 12V light that plugs into most existing sockets, 1A Max
- Main Topside Topside Panel, 10-button, 25ft Cord
- Freeze Control
- Hi-Limit Control
- Economy Mode
- Timed Filtration
- Real Time Clock Display
- Stainless Steel Heater Housing with 11KW Heater, 220V, 46A (requires 25 GPM Water Flow)
- Pressure switch installed for dry heat protection. (Heater to be
installed on pressure side of pump)
- Temperature sensors
- Triple Powder Coated metal housing that prevents rust
- EXCLUSIVE 2 YEARS LIMITED WARRANTY
Available Options (Sold Separately):
- Fiber Optic Light Circuit
- Wireless IR Remote Control Kit
- Auxiliary Topside Panel (18ft cord, no display)
- Topside Extension Cord, 25ft
- Short Base Kit
Contact SpaGuts sales for the above options if interested.
Controller Dimension (Approx): 12" H x 19.5"W x 12"D
Topside Dimension (Approx): 7.0" x 3.25"
This controller is also a replacement option for the following part numbers: Hydro Quip CS8000 Series, 33-0027R1, 3-80-0300, K3GPQ0A-220W4LO
NOTE1: COMPONENT CORDS ARE NOT INCLUDED. FOR SPA COMPONENTS WIRING, "UL" REQUIRES A LICENSED ELECTRICIAN TO RUN ELECTRICAL LINES THROUGH OUTDOOR APPROVED CONDUITS TO BE HARD WIRED INTO THE CONTROLLER.
NOTE2: THIS CONTROLLER IS NOT CONFIGURED TO HANDLE A SWIM SPA PUMP THAT IS RATED MORE THAN 15A 220V. PLEASE CONTACT SPAGUTS SALES FOR MORE INFORMATION IF INTERESTED IN A CONTROLLER FOR HIGHER AMPERAGE SWIM SPA PUMPS.
NOTE3: If a controller is needed with a Fireman Switch to activate a Gas Heater, contact us for pricing of the model CS8600-C.