Jacuzzi Spa Circuit Board, by Balboa, Model F106000 and F107000, Chip F1067R1A. OEM part number 50533.
THIS ITEM IS NO LONGER AVAILABLE. IT HAS BECOME OBSOLETED BY THE MANUFACTURER.
PLEASE SEE REPLACEMENT OPTION BELOW.
SpaGuts P/N: 10-175-0533
As known as the following models: DE-F107-CCAH, DE-F106-CCAH
This circuit board can be setup two ways:
- Features (F106000 Setup): Pump 1 1-Spd, Pump 2 1-Spd, Blower, Ozone, and 12V light circuits
- Features (F107000 Setup): Pump 1 2-Spd, Blower, Ozone, and 12V light circuits
This circuit board is compatible with the Serial Deluxe VL801D Balboa Topside Panels, the 30337 Sensor Assembly, the Balboa 110V Transformer 30270-1, and Balboa 220V Transformer 30270-2.
NOTE 1: IF THE ORIGINAL BOARD WAS SETUP FOR THE F107000 CONFIGURATION TO USE WITH A DUAL SPEED PUMP 1 (NO PUMP 2), THEN THE 52518 BALBOA BOARD KIT CAN BE USED AS AN ALTERNATION REPLACEMENT.
NOTE 2: If the original board was setup for the F106000 configuration to use with PUMP 1 Single Speed and PUMP 2 Single Speed, there are NO REPLACEMENT Circuit Board. Optional replacement would be going with a new Spa Controller Kit and ALSO RE-PLUMB to have ONLY ONE PUMP (equivalent to two pumps output) to flow water through the heater.
This is the replacement board for the 50528-01 Balboa Control System.
This item comes with a one year limited warranty.
When selecting your spa circuit board, it’s critical that you go by part numbers and NOT just by appearances. The part number on a spa circuit board can be found on a white sticker located directly on the circuit board (The ID label may be located on the board relays or on the transformer). Buy based on this part number. Do NOT purchase a hot tub circuit board just because it looks the same OR have the same Model Number as the one you’re replacing. Spa circuit boards can look identical, but be programmed differently to work with different spa controllers and topside panels. NOTE that most circuit boards need to be configured in the field to work with the existing spa components and power ratings, and a licensed professional is recommended for installation and configurations. If this circuit board is being used as an optional replacement for the original circuit board, please follow the new circuit board wiring diagram for proper installation and configuration setup. Replacement spa circuit boards are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct circuit board was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa circuit boards.
CIRCUIT BOARD PURCHASE AGREEMENT: Manufacturer's Warranty DOES NOT cover burnt terminal blocks or connections, burnt traces or terminals for circuit board purchases. These are normally caused by field installation errors, loose connections and/or over current draw from external electrical wiring and/or components. This warranty agreement applies to ALL orders made over the phone, online orders, and through purchase orders.