SpaGuts CS M-Series Electronic Spa Controller Kit with LCD Topside
SpaGuts Top of the Line CS M-Series Electronic Spa Controller with
10-button LCD Topside Panel. Available with a Fixed Position Heater,
Model CS9700, or a Slider/Remote Heater, Model CS9707. The heater manifold
is made of Stainless Steel Heater Housing with a 5.5KW Heater Element. This
controller can operate up to 3 Pumps. Pump 1 and Pump 2 circuits can be
setup for dual speed. A Circulation Pump can be installed for 24 hour Filtration
only or for Heat and Filtration.
SYSTEM A WITH THE FIXED POSITION HEATER IS NO LONGER AVAILABLE. PLEASE SELECT THE SLIDER/REMOTE HEATER WHEN SELECTING THE HEATER TYPE
NOTE: If using a circulation pump for "Heat and Filtration", the
circulation pump must be connected on at least 1.5 inch plumbing and
must output at least 25 GPM.
Pump One and Pump Two circuits up to 2 speeds, 110/220V, 15A Max (Cords Included)
Pump Three circuit at single speed, 110/220V, 15A Max (Cord Included)
Blower circuit up to three intensity, 110/220V, 8A Max (Cord Included if selected)
Ozone circuit 110/220V, 2A Max (Cord Included if selected)
Circulation Pump circuit 110/220V, 24hr, single speed, 5A Max (Cord Included if selected)
Auxiliary circuit, 110/220V (constant), 5A Max (Cord Included if selected)
12 volt light that plugs into most existing sockets, 1A Max (8ft Harness w/Bulb)
Real Time Clock Display
Optional Fiber Optic Light Circuit (Additional Fee Required for Circuit)
Stainless Steel Heater Housing with 5.5KW Heater Element and
Heater ON light, 220V, 23A
Pressure switch installed for dry heat protection. (Heater to be
installed on pressure side of pump)
Triple Powder Coated metal housing that prevents rust
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.