Description

SpaGuts CY6237 Spa Controller Kit, IN.K450-3OP Topside, Lo-Flo Canister 5.5KW Heater, Wifi Enabled

SpaGuts brand CY Series Electronic Spa Controller Kit, Wifi Enabled, Model CY6237, is powered by Gecko Aeware, and offers an upgraded 2 year warranty instead of the standard 1 year warranty provided by many other brands. It includes an IN.K450-3OP Topside Panel, and a Lo-Flo Canister 5.5KW Heater with 5ft Cord. Advanced electronics! WIFI control from your iPhone! Color-Coded Connections to help eliminate component plug-in errors.

This Spa Controller Kit with Lo-Flo Canister 5.5KW Heater allows the heater to be remotely mounted up to 60 inches from the controller box.

An option only available from SpaGuts, the CY Series is available Factory Configured to your exact specifications or as a Retrofit Kit that is easily field configured at the time of installation. Competitors only offer controllers as a Retrofit "do it yourself kits" without the time saving Factory Configuration optionally available by SpaGuts. Factory Configuration includes set-up and bench testing of Internal component circuits to work with your existing pumps, blower, ozone and circulation pump so you don't have to do any internal wiring or programming, making your controller plug and play right out of the box. Best value for most installers; saves time and prevents costly installation errors. Factory Configuration Fee of $39.95 may be requested when placing the order over the phone.

This controller operates on 220V 60Hz (220V requires 4-wire service). The SpaGuts brand CY6237 controller is equipped with Gecko Aeware Pressure Switch technology, which is the original and reliable water flow detection, and also have a lower replacement cost.

DUE TO COVID-19 CAUSING LIMITATIONS ON STAFFING AND SUPPLIES FROM THE MANUFACTURER, THIS ITEM IS CURRENTLY ON “BACKORDER”. YOU MAY PRE-ORDER NOW TO HOLD YOUR PLACE IN LINE FOR SHIPMENT WHEN THE PART ARRIVES BACK IN STOCK. THIS IS RECOMMENDED SO THAT YOUR ORDER GOES OUT SOONER.

SpaGuts P/N: 11-200-1030

INPUT CONNECTIONS:

220V 60Hz Power Supply
Pump 1 Circuit, 2 Speed, 110V/220V, 15A Max
Pump 2 Circuit, 1 or 2 Speed, 110V/220V, 15A Max*
Blower Circuit, 1 Speed, 110V/220V, 8A Max
Circ Pump Circuit, 110V/220V, 5A Max
Ozone Circuit, 110V/220V, 5A Max
Topside Connection, C1
Communication Links, CO
Light, 12V, 12W (1 Intensity), 1A Max

KIT INCLUDES:

SpaGuts CY6237-U-LH Controller
Lo-Flo Canister Heater, 5.5KW, 220V, with 5ft Cord
Topside Panel, IN.K450-3OP, 7-Button, 10ft Cable, 0607-005008
Topside Overlay, IN.K450-3OP, 7-Button, 9916-101335
Pump 1 Cord, Red Plug, 2-Speed, 14 AWG, 4-Wire, 4ft, 15-100-1115
Pump 2 Cord, Pink Plug, 1-Speed, 14 AWG, 3-Wire, 4ft, 15-150-2003
Circ Pump Cord, Blue Plug, 18 AWG, 3-Wire, 4ft, 15-350-2260
Light Cable with Socket, 8ft, 40-150-1515
Light Bulb, 12V 12W Clear, 40-175-9912
Heater Uni-Nut with Retainer and O-Ring Gasket, 3.0 inch
Heater Tailpiece with 1.0 inch Elbow Barb Hose Fitting
Hose Adapters, 1.0 inch x 3/4 inch, 2pcs
Hose Clamps, 1.0 inch Max, 4pcs
Short Tubing, 1.0 inch Diameter x 6 inch Long
DryWell for Temperature Sensor
Supplemental Installation Instructions (Included and also available online. See Tabs Above)
Owners Operation Guide
Installation Instructions
Topside Panel Template

*NOTE 1: The Blower (Purple) and Ozone (Yellow) Cords are sold separately. See below for discounted add-on price (If Needed).

*NOTE 2: If setting up Pump 2 for 2-Speed operation, the Brown Receptacle and Brown Cord will need to be purchased separately.

SYSTEM REQUIREMENTS:

220V (Requires 2 Hots, Neutral and Ground
The 5.5KW Lo-Flo Heater requires a Minimum of 12 GPM of Water Flow, and Minimum 3/4 inch plumbing

Features:

Advanced electronics!
In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to the CY System and contains data to program or configure its system. The CY System executes the data upload automatically.
Pressure Switch Protected - Water pressure is monitored by the pressure switch to help prevent the heater element from overheating.
Field-Serviceable Parts - The CY Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
UL Recognized and ETL Approved for your safety
2-Year Limited Warranty

Auxiliary Topside Panel (Sold Separately):

IN.K120-3OP Auxiliary Topside Panel, 0607-005019

Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.

WIFI Optional (Sold Separately):

iPhone App! Control your spa from your iPhone, iPad, or iPod!

Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!