The SpaGuts Electronic 4-Button Topside Panel, K-18 Model, is the replacement
topside for SpaGuts brand CS Series Single Pump Electronic Controllers.
SpaGuts P/N: 30-200-1004
Button Configuration: 4-Button (Jet-Blower-Light-Temp)
This topside panel uses an 8-pin plug, 8-wire, with 10ft cord.
Topside Dimensions (Approx): 5.0 inch x 2.5 inch
Replacement topside panel for the following SpaGuts CS Series: CS6200, CS6207
This topside panel is also a replacement option for the following Hydro Quip, Gecko and Spa Builders topside part numbers and models (Please verify button configuration before ordering): 34-0207-U (No Overlay), 0202-007134 (No Overlay), TSC-18 or K-18 (Verify Button Config), TSC-20 or K-20 (Verify Button Config), ECO-5, ECO-6, 58-355-4100, 3-00-7216, TSC-9 or K-9 (Verify Button Config), 34-0208, 80-0208 (Overlay Only)
NOTE: A standard K-18 topside panel (TSC-18, No O/L) with a 30-125-1050 overlay will be provided in a clear sealed bag.
This item carries a 1-Year Limited Warranty
NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.