SpaGuts CS Series Electronic Spa Controller Kit w/Topside
SpaGuts brand CS Series Electronic Spa Controller with a Flo-Thru 5.5KW Heater and Topside Panel. Select a Fixed Position heater or a Movable heater. This is a universal spa controller that can be configured for 220V or 110V.
The SpaGuts Electronic Spa Controller is available in the following configurations:
220 or 110 volts, 60Hz (Neutral Required)
Fixed-position or Movable in-line heaters
Single or dual motor circuits
1.5 inch or 2.0 inch pipe fittings
SpaGuts (Base) P/N:
10-150-1485, CS6200 w/Fixed Heater
10-150-1481, CS6230 w/Fixed Heater
10-150-6207, CS6207 w/25-150-1040 Movable Heater
10-150-6237, CS6237 w/25-150-1040 Movable Heater
Other configurations are possible. Contact us to discuss your needs.
Water Resistant topside control panel that easily mounts to the topside of your spa
Compact size. Controller Dimensions are (Approx): 12.25 inches
long x 10.25 inches high x 4.00 inches deep.
Heater Dimensions are (Approx): 15 inches long x 2 inches in diameter
Foot mount brackets for simplified installation and Easy Heater Removal
1.4/5.5KW, 120/240V flo-thru heater with Heater ON light and reversible water flow
*Cords are only provided depending on selections below
Fixed Position Heater: The heater
is permanently mounted under the controller and cannot be moved.
Moveable Heater: The heater can be mounted in multiple positions, or can be remotely mounted.
Topside Controller Selection
Single-motor controllers have topside controllers with 4 buttons (motor, blower, light, temp up/down), and dimensions of 5 inches x 2.5 inches (Approx). Dual-motor topside controllers have 6 buttons (motor 1, motor 2, blower, light, temp up, temp down) with dimensions of 7 inches x 3.25 inches (Approx). The topside controllers have a red LED temperature readout so you can easily read the temperature from either inside or outside the spa. If your new topside controller is smaller than your existing hole cut-out, you can install an Acrylic Placard to cover up the larger hole.
Single-motor, 4 button Digital Topside Controller. Click image to enlarge.
Dual-motor, 6 button Digital Topside Controller. Click image to enlarge.
The controller kit is also a replacement option for the following Gecko or Spa Builder S-Class SSPA controllers: 0202-205037, 0202-205212, BDLSCTSC9, 0202-205038, 3-72-7079, 0202-205013, 0202-205016 (110V, 1.0KW), 0202-205163 (S-Class, 4.0KW, Amp Connectors), 3-72-7036 (S-Class, Dual Pump, 4.0KW), 3-72-7021 (4.0KW), 3-72-7034 (S-Class, 4.0KW), 0202-205034 (4.0KW), PS6502HS24, PS6502, PS6502HS60, PS6502HN (Without Heater), 58-355-3300, 58-355-3306, 58-355-3310, 58-355-3312, 58-355-3342, 58-355-3372, 58-355-3376, 3-72-7014 (S-Class, 4.0KW), 52937 or ELE09000203 or WH-1500-2-DCAJ (Heater on Back Middle of box; 1500-2J System; Obsolete)
Your Spa Guts electronic spa controller is custom built to your specifications and is shipped directly to you from our factory, usually within 1 business day of your order. FREE shipping takes 3-5 business days via FedEx Ground.
All electrical and plumbing parts we sell are intended for installation by a licensed electrician or licensed contractor.
Any sales or technical advise provided by this site or our staff may not be construed to authorize or suggest
anything but professional installation.