SpaGuts brand Universal Inline Bath Heater Kit, 1.5KW 110V. This is the 7.0 x 2.0 inch in-line style bathtub heater, which can be installed on either the pressure or suction end of your bathtub pump depending on selection.
This bath heater is normally meant for use on 2.0 inch plumbing, but can also be used on 1.5 inch plumbing when using the fittings that are provided. Inside diameter is approximately 3.1 inch for the black heater split nuts.
WE ARE CURRENTLY OUT OF STOCK OF THE 25-150-0004 AND 25-150-0005 BATH HEATERS, PRESSURE AND VACUUM SWITCHES. ESTIMATED IN STOCK DATE IS 12/11/2018. IF YOU WOULD LIKE TO PUT IN THE ORDER NOW TO HOLD YOUR PLACE IN LINE FOR SHIPMENT WHEN THE PART ARRIVES BACK IN STOCK, PLEASE GIVE SPAGUTS SALES A CALL AT 714-764-0013.
- 25-150-0004, Pressure
- 25-150-0005, Vacuum
- Stainless Steel 7.0" x 2.0" in-line heater
- 1.5kw Incoloy heater element
- Built-in pressure or vacuum switch to activate heating
- Automatic smart thermostat (104 degrees F limit)
- Reversible mounting
- Heater on light
- Hi-limit protection
- Both 2.0" and 1.5" pipe fittings included
- Pair of 2.0" Heater O-Ring Gaskets included
- 110V 60Hz 3ft NEMA cord
- Copper Bonding Wire included
- Installation and Operation Manual
- 2-year limited warranty
- UL Recognized for safety standards
*NOTE that dimensions are approximate.
Pressure or Vaccum: To install this bathtub heater on the pressure side of your bathtub pump, select the model below
with the built-in pressure switch. To install this bathtub heater on the suction side of your bathtub
pump, select the model below with the built-in vacuum switch.
The Pressure Switch model bath heater is also a replacement option for the following model
numbers: SG301-15UP, 10-150-1655, 130520551081, PH301-15UP, CT100, CEB88P1-F012JUZ
The Vacuum Switch model bath heater is also a replacement option for the following model
numbers: SG301-15UV, 10-150-1654, PH301-15UV, CT100, CEB91P1-F012JUZ, CT301-D
This bath heater is also a replacement option for the following brand bath heaters: American Standard, Safe-T-Heater, Hydro-Quip Compact Series Whirlpool Bath Heater, Jacuzzi RapidHeat, Pure Heat, Balboa EFX 50129
The use of a SpaGuts brand bath heater helps to eliminate the rapid cooling that occurs during the operation of your whirlpool bath, providing you a continuous source of hot water and extending the pleasure of your jetted bath experience. This bath heater is normally for use in jetted bathtubs up to 70 gallons. For more information, please see Installation Instructions in the installation tab above. For larger bathtubs and specific heater size requirements, refer to your jetted bathtub manufacturer for their recommendation.
NOTE: This bath heater is designed to maintain the current bath water temperature in the tub, and is not meant to heat water from cold to hot.