Tiny Might Circulation Pump

Tiny Might 24 hour circulation pump, side discharge for optimum flow. Pump wet end can be rotated for easy installation.

Delivers 20 gpm for low water flow application, 1/16 horse power. Choose between the 110V (60Hz) 0.8A, or the 220V (50/60Hz) 0.4A.

Select pump with 1 inch barbed or threaded fitting.

SpaGuts P/N:

• 15-350-2258, 3312610-14, 1/16 HP, 115V, threaded fittings
• 15-350-2262, 3312620-14, 1/16 HP, 230V, threaded fittings
• 15-350-2259, 3312610-19, 1/16 HP, 115V, barbed fittings <== DISCONTINUED
• 15-350-2257, 3312620-19, 1/16 HP, 230V, barbed fittings <== DISCONTINUED

Excellent replacement for other circulation pumps such as the Grundfos. Also, consider checking out other circulation pumps such as the Laing and Grundfos with the following link: Circulation Pumps

This pump is also a replacement option for the following part numbers and models: TM-0061N11C37 (110V, Threaded), 10-0111 (110V, Threaded), 10-0111A (220V, Threaded), JF1G081N (220V Motor Only)

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.

If buying the Tiny Might Circ Pump with Threaded Fittings for retrofitting, add the discounted pump unions that connects to your pipes which then screws directly onto the pump threaded fittings. O-rings are included with the pump unions.

If buying the Tiny Might Circ Pump with Threaded Fittings as an exact replacement that does not require retrofitting, it is highly recommended to replace the pump union o-rings at the same time. Old pump union o-rings may cause leaks that can damage the new pump and affect the warranty. O-rings for pump unions are only available with a pump union purchase.

The Tiny Might Circulation Pump comes with a 1-year limited warranty.