For spas that have a small circulation pump installed with 3/4 inch or 1/2 inch hose, you can
install an ozone waterline venturi injector. This ozone venturi injector is like
an inline bypass kit, but is made for installation on a small
circulation pump water line. Inline bypass kit
- 35-300-1130, 1/2 inch
- 35-300-1131, 3/4 inch
Basically cut in between the discharge side
of the water line, and install the ozone venturi injector with clamps.
Make sure to have the arrow point towards the water flow direction. When
a vacuum suction is created, it is ready for an ozone connection.
If there is already an
ozone venturi injector installed and it is more than 5 years old, we recommend installing a
new ozone venturi injector. The original ozone venturi injector would most likely be filled up
with debris and other junks that will not allow a strong vacuum suction.
Ozone venturi injector includes two hose clamps.
This waterline venturi injector is also a replacement option for the following part numbers: 90-65-10185 (JED Engineering 050), 90-65-10187 (JED Engineering 075), 4-25-0054, PVDF-0684K Mazzei Injector, 6-05-0084, 684R, Del 7-0356, 6-05-0086, 9-0722-01 Mazzei Injector, 43-133-1235, 9-0722-04, 43-133-1230, 2185-220, 43-133-1240, 9-0722-06,,, 43-133-1225, 9-0472, 43-270-1205, 670-3010, 806105118622, 43-270-1200, 670-3000, 806105118615, 43-333-0110, AquaSunOzone 719, 43-333-0112, AquaSunOzone 715
This item comes with a one year limited warranty, and is NON-Returnable.