The Top Load Filter System has a built-in spring bypass valve. This valve allows some
water to bypass the filter cartridge when the filter pump is running on high speed.
This is to minimize pressure lost on the jets.
SpaGuts P/N:
- 20-350-1016, 502-2510, Filter System with 25 sq. ft. Cartridge
- 20-350-1015, 502-5010, Filter System with 50 sq. ft. Cartridge
Available with 25 or 50 square foot filter cartridge to be installed in
an existing filter hole cut-out on the topside of the spa.
Filter System Diagram:
This Top Load Filter System can also be
installed in-line underneath the spa. Includes filter housing and one
filter cartridge. Easily access the filter cartridge by removing the top
filter cap. Bottom plumbing connections are standard 2 inch pipe
connections. Reducers are provided for 1.5 inch plumbing.
NOTE: If installing this filter system in-line underneath the spa, a 28-inch
height is required for room to remove the filter cartridge.
This filter system is also a replacement option for the following part numbers: 4-00-0080 (50 SqFt), 16-270-1065 (50 SqFt), 4668-13 (50 SqFt), 502-5010B (50 SqFt), 806105088482 (50 SqFt), WWP5025010 (50 SqFt), 4-15-0151 (25 SqFt), 16-270-1060 (25 SqFt), 4668-12 (25 SqFt), 806105088420 (25 SqFt), 500-2510 (25 Sqft, 1.5"), 500-5010 (50 Sqft, 1.5")
The filter housing and cap comes with a one year limited warranty. Included filter cartridge comes with a 90 day limited warranty.
To purchase a replacement Top Load Filter Cartridge, Click here.
(Requires selection below ...)