Aqua-Flo FMHP 48Y Spa Pump, Gecko, 1.5 BHP, 1.0 HP Cont, 110V, 2spd, 1.5-inch, 02110000-1010 (SPECIAL ORDER)

Aqua-Flo Flo-Master OEM Spa Pump, FMHP Model, by Gecko, rated 1.5 BHP, 1.0 HP Continuous, 115V, 60HZ, 2-Speed.  OEM part number 02110000-1010.

NOTE 1: The pump photo shown above does not show a capacitor mounted on top of the motor. We cannot guarantee if the motor that is shipped will or will not have the capacitor attached on top of the motor. Make sure there is plenty of room under the spa for a motor with 6 inches long x 2.5 inches tall x 2.25 inches wide capacitor on top of the motor. 

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-5 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

SpaGuts P/N:  15-720-2110

Feature:

• Single Phase, 115V, 60Hz, 3450/1725 RPM
• 1.0 HP, 1.5 BHP, Dual Speed
• 9.0A/3.2A* (Amp varies)
• FMHP Pump Wet End
• 48-Frame Thru-Bolt Motor
• Output up to 120 GPM
• Carbon ceramic seals with Viton® elastomers for long-lasting
• Multi-directional volute mountings
• Compact design
• cURul or CuRus Certified
• 1.5 inch Center Suction
• 1.5 inch Side Discharge
• No Cord

Dimensions (Approx.)*:

• Overall: 16.17 inch L x 6.89 inch W x 8.23 inch H
• Motor: 10.5 inch L x 4.99 inch W x 7.04 inch H
• Wet End: 5.67 inch x 6.89 inch W x 8.23 inch H

*NOTE 2: Amp rating and dimensions may vary depending on the motor brand and model that is used with this pump. Motor brands can be US Motors, AO Smith Century Laser, GE, Etc... Please contact us to verify dimensions if space is very limited for the new pump.

Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings).  Pump Unions are sold separately.

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosening the four long screws at the back of the motor. The pump intake (suction) is located in the front center face of the pump.

This pump is also a replacement option for the following part numbers: M5123, AF11575-SS, AE11575-SS, AF11510 or AE11510 (1.0HP or 1.5HP SPL 110V), 91040690-000, 02110000, 02110612-1, 02010000-1010, 02010000-1, 02107002-1 (3/4 HP 110V)

This FMHP Pump is also the replacement option for the "Relia-Flo" pumps by Caldera Spas. Verify motor amp rating and voltage, the pump discharge type and size fitting to match. Note that the new motor will not have the back end cover with heat vent/exhaust connection. In case the original motor does have it, the original motor back end cover with heat vent connection may be installed on the new motor if it fits. Otherwise retrofitting a heat vent onto the new motor is required only if it is needed. 

Motor part numbers that are normally used for this pump: F48AD32A79R, 5CK38RN3818X, S55CXNPH7241, C55CXFBY-2918 

This item comes with a two year manufacturer's limited warranty.