Balboa Topside Panel, VL406U, Duplex Digital, 4-BTN, 55350-02

Replacement Balboa Topside Control Panel, 4-Button Digital Duplex VL406Umodel with LCD display. OEM part number 55350-02.

SpaGuts P/N: 30-175-5350

Button Configuration: (Top Row) Jets, Warm; (Bottom Row) Light, Cool

This topside panel uses a phone-type connector, 8-wire, with 7ft cord. Compatible with theVG500Z and VS500Z Balboa Control Systems.

Topside Dimension (Approx): 7.0 inch x 3.4 inch

This topside panel is also a replacement option for the following topside part numbers: 55417-01 (PANEL BALBOA VL406U NO O/L) that uses the 11947 Overlay, ELE09204200 or 50009-01 (Coleman Spas), ELE09900191 (Cal Spas; No Saftey Suction Light), ELE09900194 (OC Spas), ELE09204633 (No Overlay; Must match button configurations), ELE50043-02 or 50043-02 (Cal Spas; No Saftey Suction Light), ELE50465 or 50465 (Cal Spas; No Saftey Suction Light), ELE09900195 or 52309 (Geo's Spas; No Saftey Suction Light), ELE09204632 or 50252 (American Spas), 34-55350-K

This item comes with a 1-year limited warranty.

If a longer cord is needed, Click here to see available extension cords.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.