Articles by tag "temperature"

1. 394. Support: Temperature display is flashing on the Electronic Topside Keypad.
   100
   When a SpaGuts Electronic Controller is first powered up, the temperature display on the topside keypad should start flashing the temperature until a key is pressed. Otherwise the temperature display will continue to flash. After a power outage and before a key is pressed on the topside ...
2. 514. Support: SpaGuts thermostat temperature range.
   108
   SpaGuts Pneumatic Spa Controllers use a thermostat to control the water temperature. Thermostats are not as accurate as a digital temperature sensor that is installed on a thermowell which mounts on the wall of the spa or hot tub. Below is the average thermostat temperature range when set at a ...
3. 690. What is the minimum and maximum temperature setting for the VS-Series Spa Controllers?
   105
   For the VS Series Spa Controllers, the minimum temperature setting is 60ºF to 80ºF and the maximum temperature setting is 104ºF. Water temperature settings can be set within these ranges. NOTE 1: From the topside panel, the lowest setting is 80ºF. To bring down the temperature to as low ...
4. 372. Spa temperature limitation.
   136
   Due to state regulations all spa controllers are limited to 104 degrees F max setting. However the system may heat over 1 or 2 degrees to keep the spa heated above 104 degrees F. Any higher temperature is consider to be health hazardous. The water in a spa or hot tub should never exceed 104 ...
5. 503. What is the minimum and maximum temperature setting for the SpaGuts CS and M Series Spa Controllers?
   132
   For SpaGuts brand CS and M-Series Spa Controllers, the minimum temperature setting is 59ºF to 60ºF and the maximum temperature setting is 104ºF. Water temperature settings can be set within these ranges. NOTE: The minimum and maximum temperature setting is fixed and cannot be adjusted. ...