Articles by tag "Support/Balboa"

1. 547. Support: Smoke coming from inside a Balboa or SpaGuts VS Series Spa Controller.
   99
   You have reported that there is smoke coming from inside the Balboa or SpaGuts VS-Series Spa Controller. Please check the following to troubleshoot: - Exactly where is the smoke coming from inside the controller box? You'll need to open up the controller cover and provide specific location on ...
2. 554. Support: Balboa Optional Freeze Sensor installation.
   101
   Installation of the 22312 Balboa Optional Freeze Sensor is recommend by a licensed spa technician or a licensed contractor who are experienced with spas and hot tubs. This sensor gets plugged into J22 "Aux F" location near the Sensor A connection of the main circuit board. See wiring diagram ...
3. 586. Support: GFCI breaker is now tripping off the VS-Series Spa Controller (not initial installation).
   115
   If the GFCI breaker is now tripping off the VS Series Spa Controller, perform the following to troubleshoot: - Try unplugging all the component cords. This includes the electrical Topside (if one is installed), pump(s), blower, ozone and light. Now try setting the GFCI again. - If the GFCI ...
4. 612. Support: Temperature reading in Fahrenheit or Celsius on a Balboa 54115 Circuit Board, 54114 Balboa System
   95
   Make sure to turn off the power to the spa when performing the following configuration: Directly on the Balboa 54115 Circuit Board, there is a jumper J32. Move J32 jumper to hold onto ONLY one pin to read Fahrenheit. If the J32 jumper is holding both pins, it will allow the topside panel to ...
5. 740. Support: Balboa Wifi Module Troubleshooting, Installation and Resetting Instructions
   100
   Here is the link to Balboa Wifi Module Troubleshooting, Installation, FAQ's and Resetting Instructions: Link: http://www.balboawatergroup.com/bwa-FAQ#Wireless
6. 849. Support: Balboa TP800 and TP900 Topside Panel background color on the display
   91
   Page 14 of the Balboa TP800 and TP900 Reference Card explains how to change the background color on the topside display. Link to Reference Card: http://www.spaguts.com/Documents/40985_F_Reference_TP800_and_TP900.pdf Scroll through the "Setting" Menu on the topside panel to get to the ...
7. 850. Support: Balboa TP800 and TP900 Topside Panel Scenes Setting
   91
   Scenes are available on early version of the Balboa TP800 and TP900 Topside Panels, and may not be available on newer versions. NOTE that Scenes cannot be loaded onto a Balboa topside panel that does not have Scenes. Scenes are stored combinations of equipment states. For example if you ...
8. 906. Support: Nothing works on New Install of Balboa VS100 Controller Kit
   103
   You reported that the Balboa VS100 Controller Kit does not work when plugged into a 120V outlet. Please check the following to troubleshoot: 1) Confirm that the Corded GFCI is in the Set Position. 2) Verify that there is 120V at the board by measuring voltage between Line 1 and Neutral off ...