Articles by tag "ozonator"

1. 92. Support: Why does the light on my ozonator stay on all the time on the SpaGuts CS-Series?
   121
   On Spaguts CS-Series Controllers, the ozone circuit is setup to operate with the primary pump low speed. This means that whenever the primary pump is on low speed, the ozone unit will be active. For the ozone circuit to follow this operation, the voltage of the ozone circuit must be the same ...
2. 99. How do I know if my ozonator is working?
   134
   To identify if the ozone generator is working, the red, green or orange light should turn on (CD or CRT version) or the unit should glow (UV version). Ozone gas is clear and you may not even see anything flowing through the ozone tubing. For the UV (Ultra Violet) ozone generator, if you don't ...
3. 266. Support: New ozonator is on, but does not create bubbles like the original ozonator (No Air Pump Version)
   128
   The Del APG-U, JED 103, Balboa UV, and the Balboa CRT ozonators as advertised on our website, only creates ozone gas. They Do Not have a Built-in Air Pump to help create bubbles or push out the ozone gas into the plumbing or spa. They need to be installed in conjunction with a venturi injector ...
4. 660. Ozonator with built-in air pump
   109
   Ozonators with a built-in air pump do not require injectors with a venturi vacuum suction. These type of ozonators can be installed with a Thru-Hull Adapter Kit or Over the wall tubing with air stone. We carry the JED 203 model Ozone Kits with either 110V or 220V voltage ratings. These ozone ...