Articles by tag "Sales"

1. 477. Salt Water Application
   134
   When using salt, you need a 100% Titanium heater assemly to be installed on a Spa Controller. Salt corrodes the Incoloy Heater Element quickly, and slowly corrodes the stainless steal heater tube. Regular pool and spa pumps are OK with salt water application when there is good amount of ...
2. 537. Will your blower work on 50Hz?
   128
   Any of the 220V blowers we advertise will work on 50Hz and 60Hz. Hertz (Hz) are also referred as "cycle". The 110V blowers we advertise will only work on 60Hz.
3. 834. Sales: Can I buy just the logic chip for a circuit board?
   110
   The logic chip is not available for sale by themselves. You will need to order the complete circuit board that comes with the chip pre-installed. If your control box is more than a few years old, it might be time to replace the whole controller vs. individual components. Not only are the ...
4. 869. Sales: What are the measurements on your Spa Pack so I can align it to my plumbing?
   98
   ALL Spa Packs that is offered have the same dimensions of 26" L x 13" H x 16" D. And ALL Spa Packs are made for Retrofitting. This means re-plumbing is required to the spa pack, re-fitting is required for the new topside panel, re-routing for the power supply, and possibly component cord change ...
5. 872. Sales: How to determine the correct replacement Inline Bath Heater?
   102
   To help determine the correct inline bath heater for your jetted bathtub, you will need to consider the following things: 1) Power: Is the dedicated GFCI outlet rated 110V or 220V? And is the GFCI rated 15A or 220V? 2) Location to install the Inline Bath Heater. a. Replacing An Existing ...
6. 909. Sales: Information needed to locate a replacement Topside Panel.
   44
   To determine the correct replacement Topside Panel, please look for the Model Number, Part Number and S/N (serial number) based on the information below (Don't Just Order Based on the Appearance): TOPSIDE PANEL INFORMATION: The Model Number, Part Number or S/N (serial number) is located on the ...