Articles by tag "cs6207"

1. 100. Support: My motor comes on in high speed for circulation and heating mode, and on low speed when pushing jet control button (CS-Series)
   118
   If the motor connected to Spaguts CS-Series Controller comes on in high speed in circulation and heating mode but pushing the jet control button changes the motor back to low speed, the most likely cause is that the two speed wires are reversed at the motor. Please refer to the owner's manual ...
2. 304. Support: Now nothing works off the CS-Series Electronic Controller. No display, and no functions from any components.
   134
   You have reported that now nothing works off the CS Series Electronic Controller. No display, and no functions from any components. - Sometimes, there may be a power surge at your location. Make sure all breakers and GFCI's are turned off and turned back on. Then verify that there is either ...
3. 405. Support: Topside installation for the CS-Series and M-Series Electronic Spa Controllers
   106
   TOPSIDE INSTALLATION FOR THE CS-SERIES AND M-SERIES CONTROLLERS: NOTE: An installation manual with wiring diagram are provided with our spa controller kit purchase. Please refer to it, and/or follow the instructions below for topside only purchases. 1) If there is an existing topside hole ...