Articles by tag "Support/Heater"

1. 308. Support: Heater element not working anymore, burnt out or shorted out.
   132
   You have contacted us regarding the replacement heater element is not working anymore. Please read the following to troubleshoot. - Is the heater element tripping the GFCI breaker, or it is just not heating anymore? - If the heater element is tripping the GFCI, take a resistance reading ...
2. 539. Support: Bath Heater not working
   104
   You have reported that the bath heater is not heating. Please have an electrician or a licensed contractor who is experienced in this field to perform the following inspection. First of all the jetted bath tub needs to be filled up to the required level with hot water (check with the hot tub ...
3. 583. Support: Heater Assembly not working or heating anymore.
   97
   You have contacted us regarding the replacement heater assembly is not working anymore. Please read the following to troubleshoot. - Is the heater tripping the GFCI breaker, or it is just not heating anymore? - If the heater is tripping the GFCI, take a resistance reading between one of ...
4. 607. Support: New spa heater is installed, and it will not heat (no heat)
   97
   You have contacted us regarding the new spa heater is not heating. Please go through the following information to troubleshoot. 1. Note that the spa must be running for at least 2 to 4 hours to determine if the spa is heating or not. 2. To verify if the problem is the heater, verify ...
5. 650. Support: Baptistry or Baptismal Heater Unit Heater ON light is not activating.
   97
   You have reported that the heater unit is not activating the heater, and the heater ON light does not come on. 1) Verify to make sure correct power is supplied to the heater unit. 2) Make sure the pump is discharging water through the heater with strong water flow. A pressure switch is ...
6. 859. Support: Rust and Corrosion by Salt Systems
   103
   Salt Systems are corrosive to heater elements that are NON-Titanium. This is because you have to do MORE to maintian the salt level and also balance the salted water properly. If the salt water treatment is NOT carefully maintained AND balanced, it will quickly rust and corrode a Non-Titanium ...
7. 432. Gas Heater to work with non-gas spa controllers with electric heaters from SpaGuts.
   133
   Here are your choices on a Spa Controller for a Gas Heater application. 1) For Stand-A-Lone Gas Heaters that just need water flow to trigger the Ignition Switch. A) Our Non-Gas Spa Controllers come standard with an electric heater (Any of our Standard Spa Controllers on SpaGuts website). ...