Articles by tag "sensor"

1. 354. Support: Can I use my existing temperature sensor with the SpaGuts Electronic Controller?
   97
   We highly recommend NOT to use your existing temperature sensor with the SpaGuts Electronic Controller. Due to calibration settings, the existing temperature sensor may not be calibrated to work properly with our Spaguts Controller. All SpaGuts Controllers are calibrated to work with the ...
2. 360. Support: Command Center temperature displaying is showing "OP" or "OPB".
   94
   If the temperature display on the Command Center is showing "OP" or "OPB", it indicates an open probe or signal cannot go through the line (possible cut on the temperature sensor cable). With these error code displaying, it's most likely that the temperature sensor is damaged, and the Command ...
3. 482. Support: How to install a new replacement temperature sensor on the Electronic Controller.
   129
   Installation of a New Replacement Temperature Sensor: Shut Off Power Completely to the spa or hot tub. If the old temperature sensor is installed, follow that temperature sensor cable to the circuit board. Otherwise refer to the wiring diagram to locate the temperature sensor connection. ...