LX Spa Pump, 48WUA, 1.0 HP 110V, 2-Spd, SD, 2.0in, 60Hz, 48Y, 48WUA1001C-II (Special Order)

Replacement LX Spa Pump by Guangdong Lingxiao, Model 48WUA, WUA Series.  Rated 1.0 Horse Power (HP), 110V, 2-Speed, 48-Frame.  OEM part numbers 48WUA1001C-II and 10-48WUA1001.

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-5 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

NOTE: The pump photo shown above shows dual capacitors mounted on top of the motor.  We cannot guarantee if the motor that is shipped will have 1 or Dual Capacitor attached to the outside of the motor housing, and at a specific location due to different motor models that are supplied.  Make sure there is plenty of room where the spa pump is located for a motor that may have a single of dual motor capacitor on the outside of the motor housing.

SpaGuts P/N:  15-973-1001

Pump and Motor Ratings

• Pump Wet End Model: 48WUA
• 2.0 inch Center Suction
• 2.0 inch Side Discharge
• Discharge Rotation: UP Position (12 o'clock)
• Horse Power: 1.0 HP
• Voltage:  115V
• *Amps:  10.3/3.8 (Varies by Motor)
• Frequency:  60Hz
• RPM:  3450/1725
• Speed:  Dual
• Type:  Indoor
• Usage:  Above Ground Pool and Spa
• Motor Mount:  Welded

*NOTE:  Amp rating and dimensions may vary depending on the motor brand and model that is used with this pump. Motor brand can be US Motors, AO Smith Century Laser, GE, Etc… Please contact us to verify dimensions if space is very limited for the new pump.

This is a Side Discharge Pump with 2.0-inch fittings.  Outside thread to outside thread measurement on the pump fittings is approximately 3.1 inches.  (Pump Unions are sold separately)

Pump dimensions (Approx):  15.75 inch L x 8.0 inch H x 7.25 inch W

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosening the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.

This pump is also the replacement option for the following spa pump models: 06610006-2, 06610006-2040, Wavemaster 4000 (1.0HP), Wavemaster 6000, Watkins 37334-02 (1.0HP), 06610003-5, 06610002-5, 06614510-2, 15-200-0062, Wavemaster 7000 (33145 - 1.0HP), C55CXFBY-2918 (Motor Only; Must verify Wet End), 06210049-2 (Watkins), 06614000-5 (Freeflow), C55SWGYA-3860 (Motor Only; Must verify Wet End), Watkins Wavemaster 38944, Watkins 38944, 06115852-1, 06610510-2, 06610000-2, Watkins 77407, 1431701-01 (Watkins), 5KCP112EXP0012X (Motor Only; Must verify Wet End), 06110510-2, 91231606 (Suction Cover, Faceplate)

Motor part numbers or models that are normally used for this pump: BN60, 7-186022-03

This item comes with a one year manufacturer's limited warranty.