Vico Ultimax Spa Pump, Niagara by Balboa, 56Y 4.0HP, 6.0BHP, 220V 2SPD, 2.0in, 1056024, 5235212-S

In stock
In stock
Special Price $394.95 Regular Price $444.95


  • REGULAR PRICE AT $444.95
  • SALES FROM 06/07/2023 TO 06/17/2023. WHILE SUPPLIES LAST! 

Replacement Vico Ultimax Spa Pump, Niagara model by Balboa. Labeled 4.0HP Continuous, 6.0 Break HP, 220V 2-speed 56-Frame, 2.0-inch Intake and Discharge. OEM part number 1056024, 5235212-S and 5235212-B.

SpaGuts P/N: 15-175-6024


  • Labled 4.0HP Continuous (Previously Labeled 3.0HP)
  • Rated 12.0/3.5A (Amp Rating Varies*)
  • Dual Speed Pump (Low/High. Can also be wired for single speed)
  • 2.0-inch Intake and Discharge (Outside thread measures approximately 3.1 inch)
  • Replaces most Vico Ultimax or Niagara spa pumps with similar amp draw
  • UL, TUV, CSA, and CE/VDE/GS certified
  • All seals are cabon ceramic with Viton® elastomers for long-lasting performance
  • Cool running 56 frame motor
  • Reliable performance and long service life for more enjoyable ownership

Dimensions* (Approx.): 15.82 inch L x 8.83 inch H x 6.5 inch diam. wet end

*NOTE: Amp rating and dimensions may vary depending on the motor brand and model that is used with this pump. Motor brand can be US Motors, AO Smith Century Laser, GE, Etc... Please contact us to verify dimensions if space is very limited for the new pump.

Replacement option for the following pump models: PL389, PUUMS2602582F, 1016174, 1016016, 1016024, PUUMSC2602582F, 1016184, 1016167, 1016194, PL388, 1016166, 1016159, PL342, 1016160, PL343, 1016205, PUUMS602582F (1-Speed), 10-16-178 (1-Speed), 1016178 (1-Speed), 1016177 (1-Speed), PUUMS502582F (1-Speed), 1016004 (1-Speed), 1016170, PUUMSC402582FR or PUUM402582F or 1016031 (1-Speed), 1016195 or PUUMC2302582FR, 1016236, 1056016 or PUUM2302582FR, 5KCR49WN2340AX (Motor Only; Must Verify Pump Wet End), PUBFS2602582F, 5KCPP49WN9094X (Motor Only; Must Verify Pump Wet End), PRC9094X, 1016111, 1016084, PUUMSC2502582F (5 BHP / HPR), 1016235 (5 BHP / HPR), PUUMSC2602582FDS (6BHP, Cal Spas), 1016019 (1-Speed), 5KCP49WN9094X (Motor Only; Must Verify Pump Wet End), X320528, 1016280 (4.0 HPR), 1016230 (6.0 HPR), PUM22901085/PRC505, 5KCP49WN9070X (Motor Only; Must Verify Pump Wet End), 1016278 (1-Speed)

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four long bolts at the back of the motor. The pump intake (suction) is located in the front center face of the pump.

You may add a cord to be attached to the motor at a discounted price. See cord options above.

If buying this pump for retrofitting, add a pair of pump unions that connects to your pipes which then screws directly onto the pump threaded fittings. O-rings are included with the pump unions. Regular price is $22.95.

If buying this pump as an exact replacement that does not require retrofitting, it is highly recommended to replace the pump union o-rings at the same time. Old pump union o-rings may cause leaks that can damage the new pump and affect the warranty. O-rings for pump unions are only available with a pump union purchase.

This item comes with a 2-Year limited warranty.

Write Your Own Review
You're reviewing:Vico Ultimax Spa Pump, Niagara by Balboa, 56Y 4.0HP, 6.0BHP, 220V 2SPD, 2.0in, 1056024, 5235212-S
Your Rating
Contact Us