JED 203 CD Ozonator Kit w/ Air Pump, Adapter with Nema Plug A, 110V (SPECIAL ORDER)

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-20 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

This is the 110V JED 203 Corona Discharge (CD) Ozonator Kit with built-in Air Pump. Attached to the ozone unit is a 4-foot cord with Nema Plug (cord A) Adapter. The plastic enclosure (housing) is outdoor rated and rainproof. The JED 203 is typically installed in conjunction with a Thru-Hull fitting (sold separately), or the dispersion stone may be used at the end of the ozone tubing that goes over the side of the hot tub.

Spaguts P/N: 35-300-1194

Kit comes with Ozone unit, back-flow check valve, 4ft air tubing, dispersion stone, installation instructions, mounting screws and power cord.

Specification:

• Dimensions (Approx): 9 1/2 inch x 8 1/2 inch x 4 1/2 inch
• Input Voltage: 110 VAC, 60 Hz
• Operating Current: 0.42 Amp
• Ozone Output (Approx): 100 mg/hr
• Power Consumption: 110V, 50 Watts
• Capable of handling water volume of up to 5,000 gallons

Benefits

• Produces High and Consistent Ozone output
• Disinfects water by killing many form of Viruses and Biological contaminants
• Reduces the use of chemicals levels up to 90%, which means reducing the discomfort of skin and eye irritations, and reduces strong chemical odors
• Low Power Consumption

Optional (Sold Separately)

• For a thru-wall ozone injection, contact us about the 35-300-0065 Thru-Hull Adapter Kit for Ozone

This item comes with 1-Year limited warranty.

NOTE: Ozonators are for outdoor use only. Ventilation Required. This ozone unit is intended for water treatment/water features.

Replacement option for the following part numbers: 35-300-1194 JED-203