AO Smith Spa Motor with High Performance Pump - 56 Frame

This is the 56-frame, 2-speed, AO Smith Electric Spa Motor with a high performance pump in a range of sizes from 2.0 horsepower to 5.0 horsepower. Our dual speed motors can also be wired to operate in single speed.

You may add a color coded J&J mini cord which is typically the industry standard motor cord or if your existing spa controller does not accept the J&J mini plug type you can wire your existing cord to the motor for a quick and easy retrofit.

Pumps with 56-frame motors come standard in 2.0 inch side discharge with screw on unions. You may select the intake to be 2.0 inch or 2.5 inch, matching screw-on union provided

After the unions are glued onto the spas existing plumbing, the unions screw directly onto the pump suction and return fittings and seal tightly with included o-rings.

NOTE: All 56-frame motors must be 220V.

AO Smith is one of the largest manufacturers of spa motors in the world and in our opinion is the very best money can buy. We offer brand new pumps and motor, also the best in the industry.

Pumps with 56-frame motors carry a 3-year limited warranty on the pump and motor.

Keep in mind to not over power your spa by going from a 48-frame motor to a 56-frame motor. See water flow chart for a 48-frame and 56-frame motor. Click here to view diagram and specification of the 56-Frame Pump.

Is Your Pump Above the Water Line?

If you need to install your spa pump near or above the waterline - as is common for in-ground spas - you will need a pump pot. The pump pot prevents water from draining back into the spa when the motor is turned off.