Hydro Quip Ye-5 Series Spa Controller Kit, w/IN.K450-3OP Topside, 5.5KW Lo-Flo Slipstream HTR, CS6P52Y-US-4 (SPECIAL ORDER)

Hydro Quip brand Ye-5 Series Electronic Spa Controller Kit, Wifi Enabled, Model CS6P52Y-US-4. It includes an IN.K450-3OP Topside Panel, and a 5.5KW Low-Flo Slipstream "Double Barrel" style Heater with 3/4 inch barb fittings. Advanced electronics! WIFI control from your iPhone!

SPECIAL ORDER NOTES: THIS ITEM IS A SPECIAL ORDER AND HAS AN ESTIMATED 2-15 BUSINESS DAYS LEAD TIME BEFORE SHIPPING. SPECIAL ORDERS ARE NON-RETURNABLE AND CANNOT BE CANCELED ONCE THE ORDER IS PLACED.

Retrofitting, Field Configuration and Software Setup Selection are required at the time of installation. 

This controller operates on 220V 60Hz (220V requires 4-wire service). The CS6P52Y-US-4 controller is equipped with Gecko Aeware Pressure Switch technology, which is the original and reliable water flow detection, and also have a lower replacement cost.

SpaGuts P/N: 11-150-6545

INPUT CONNECTIONS:

• 220V 60Hz Power Supply
• Pump 1 Circuit, 2 Speed, 110V/220V, 15A Max
• Pump 2 Circuit, 1 or 2 Speed, 110V/220V, 15A Max*
• Blower Circuit, 1 Speed, 110V/220V, 8A Max
• Circ Pump Circuit, 110V/220V, 5A Max
• Ozone Circuit, 110V/220V, 5A Max
• Topside Connection, C1
• Communication Links, CO
• Light, 12V, 12W (1 Intensity), 1A Max

KIT INCLUDES:

• HydroQuip Ye-5 Control System
• Lo-Flo Slipstream "Double Barrel" style Heater
• Flow Switch with JJM Plug, 45-150-0218
• Topside Panel, IN.K450-3OP, 7-Button, 10ft Cable, 0607-005008
• Topside Overlay, IN.K450-3OP, 7-Button, 9916-101335
• Topside Adapter Plate, 55-720-2123
• Pump 1 Cord, Amp Plug, 2-Speed, 14 AWG, 4-Wire, 4ft
• Pump 2 Cord, Amp Plug, 1-Speed, 14 AWG, 3-Wire, 4ft
• Circ Pump Cord, Amp Plug, 18 AWG, 3-Wire, 4ft
• Light Cable with Socket, 8ft, 40-150-1515
• 12V 12W Clear Light Bulb, 40-175-9912
• Hose Adapters, 1.0 inch x 3/4 inch, 2pcs
• Hose Clamps, 1.0 inch Max, 4pcs
• Short Tubing, 1.0 inch Diameter x 6 inch Long
• DryWell for Temperature Sensor, 50-150-0044
• Supplemental Installation Instructions (Included and also available online. See Tabs Above)
• Owners Operation Guide
• Installation Instructions
• Topside Panel Template

 

*NOTE: If setting up Pump 2 for 2-Speed operation, the 4-wire Amp Receptacle and 4-Wire Cord will need to be purchased separately.

 

SYSTEM REQUIREMENTS:

• 220V (Requires 2 Hots, Neutral and Ground)
• The 5.5KW Lo-Flo Heater requires a Minimum of 10 GPM of Water Flow, and Minimum 3/4 inch plumbing

Features:

• Advanced electronics!
• In.put - New Input Terminal Bloc - In.put was designed to ease wire insertion (up to # 4 AWG) and connections. Tighter input connection reduces heat generated for increased component lifetime.
• In.stik - Automated Software Upload - In.stik a pen drive with an in.link connector very similar to a USB memory stick. It connects to the CY System and contains data to program or configure its system. The CY System executes the data upload automatically.
• Pressure Switch Protected - Water pressure is monitored by the pressure switch to help prevent the heater element from overheating.
• Field-Serviceable Parts - The CY Series provides easy access to the controller board for all maintenance and replacement requirements. Each component circuit can also be field configured from 110V to 220V, or from 220V to 110V.
• UL Recognized and ETL Approved for your safety
• 1-Year Limited Warranty

Auxiliary Topside Panel (Sold Separately):

• IN.K120-3OP Auxiliary Topside Panel, 0607-005019

Add the optional IN.K120-3OP Auxiliary Topside Panel for additional control from the other side of the spa! Controls up to 3 pumps, and a light. It comes with a 20ft cable, and plugs into one of the CO ports on the main circuit board.

WIFI Optional (Sold Separately):

• iPhone App! Control your spa from your iPhone, iPad, or iPod!

Add the optional IN.TOUCH 2 RF Interface Module, P/N 0608-521020, download one of the iPhone Apps, and use your iPhone, iPad, iPod or computer to control your Gecko IN.YE Controller remotely! Also works with Android! The Gecko IN.YE Controller we have in stock are pre-program with the software capable of WIFI control. Imagine the possibility of being able to monitor your spa and control it remotely within in your wifi network with the Home App, or do it all remotely from across country with the World App using the internet. The wifi App also allows you to set all your Economy and Filtration Cycles through your phone (iPod, iPad or computer), with precision that goes to the minutes! Basically Amazing!!!

• (*iPhone, iPad, iPod and computer are not included)

 

Dimensions (Approx.):

• Controller: 12.5 inch L x 10.5 inch H x 4.5 inch W
• Heater: 19.5 inch L x 4.0 inch H x 4.625 inch W
• Topside Panel: 7.25 inch L x 3.0 inch W
• Topside Adapter Plate:  8.5 inch x 3.9 inch