SpaGuts replacement cable harness, version F, for the pressure switch to circuit board connection. Cable harness has 22 AWG wires, is approximately 14 inches long, with a 3-Pin female connector to two female terminal connectors.
SpaGuts P/N: 23-150-0199
Compatible with the SpaGuts CS Series and M Series Controllers with attached Flo-thru Heater. UL
and CSA listed.
Also known as a pressure switch cable, flow switch cable, psi cable.
Replacement option for the following cable harness part numbers: 34-0199F, 5-50-6012, 59-355-1027, 9920-400997 (6-inch)
NOTE1: The circuit board will only show 2 pins with a space for the 3rd pin. The cable harness with 3-pin connector will fit.
NOTE2: The cable harness being supplied may have 2 (black, red) or 3 (black, red, green) wires connected on the 3-pin connector. The green wire may or may not be attached to the 3-pin connector (which is a dummy wire). DO NOT worry if the green wire is present or not on the 3-pin connector. Either configuration will work on the SpaGuts brand CS Series and M Series electronic circuit board.
This item comes with a 90 day limited warranty, and is NON-Returnable.