Call (714) 764-0013
Replacement Gecko Aeware IN.K450-3OP Topside Panel with 7-Button Overlay. Cable length is 10ft with in.link plug. OEM part number BDLK4503OP.
SpaGuts P/N: 30-720-4503
Button Configuration: ON-PUMP1-PUMP2-PUMP3-LIGHT-UP-DOWN
This package consist of the in.k450 keypad (0607-005008), and the overlay (9916-101335). This topside is compatible with the following Gecko Aeware systems: in.xe, in.xm, in.xm2, Y Series
This topside panel is also a replacement option for the following part numbers: 0607-005012, 3-00-7248, 0607-005008 (Topside with no overlay), 9916-101335 (Overlay only), 3-05-7102 (Overlay only), 3-00-7240 (IN.K400; Requires Larger Hole Cutout), 0607-005002 (IN.K400; Requires Larger Hole Cutout), 3-90-0128, 0607-005008, 3-90-0129, 0607-005012, 58-337-1605, 58-337-1922 (Overlay only), Water Edge 0607-005007, 7005059 (NO Overlay), 0607-005017 (with 25ft Cable; may need the In.Xtend)
Dimensions (Approx): 7.25 inch x 3.0 inch
This item comes with a one year limited warranty.
When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.