Aqua-Flo Flow-Master Spa Pump, by Gecko, FMHP, 1.0 HP 110V 60Hz, 1-Spd, 48Y, 02010000-1010 (OBSOLETE)

Aqua-Flo Flow-Master OEM Spa Pump, FMHP Model, by Gecko, rated 1.0 HP, 110V, 60Hz, 3450 RPM, 9.0 amps, single speed. OEM part number 02010000-1010.

THIS PUMP IS OBSOLETE, AND HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE CONSIDER THE SPA-FLO PUMPS AS THE ALTERNATIVE REPLACEMENT OPTION TO RETROFIT.

SpaGuts P/N: 15-720-0208

Feature:

• Single Phase, 115V, 60Hz, 3450 RPM
• 1.0 HP, 1.5 BHP, Single Speed
• Rated Approximatly 9.0A (*May vary depending on motor being used)
• FMHP Pump Wet End
• 48-Frame Thru-Bolt Motor
• Output up to 120 GPM
• Carbon ceramic seals with Viton® elastomers for long-lasting
• Multi-directional volute mountings
• Compact design
• cURul or CuRus Certified
• 1.5" Center Suction
• 1.5" Side Discharge
• No Cord

Dimensions (Approx. May vary depending on motor being used):

• Overall: 11.62" L x 7.5" H x 7.0" W
• Motor: 7.46" L x 8.5" H x 5.7" W
• Wet End: 8.0" H x 7.0" W x 5.67" D

Threaded fittings are standard 1.5 inch (approximately 2-3/8 inch if measuring from outside thread to outside thread of fittings). Pump Unions are sold separately.

This pump is also a replacement option for the following part numbers: 34-402-5002, 1-00-0208, 1431501-01, 1431501-03 (Watkins), 02010422-5, 02010000-1010B

Motor part numbers that are normally used for this pump: 5KCP112EXP0012X

The pump image shows the pump discharge on top pointing to the 12 o'clock position. The pump discharge can also be rotated every 90-degrees (3, 6 or 9 o'clock positions) by loosing the four screws at the back of the pump wet end. The pump intake (suction) is located in the front center face of the pump.

This item comes with a ONE year manufacturer's limited warranty.