Aqua-Set Topside Panel, Len Gordon, 110V, 4-BTN, 4001-4SS, 10ft Cord, 930750-516

In stock
In stock

Replacement Aqua-Set Topside Panel by Len Gordon, Model 4001-4SS. No Temperature Display. OEM part number 930750-516.

SpaGuts P/N: 30-850-0750


  • Rated 110V, 50/60 Hz, 100mA Max Load
  • Thermostat, Range from 60°F to 104°F
  • 4-Air Button, Built-in
  • 4 Indicator Lights, Ready-Heat-Jets-Blower
  • Attached Power Cord with 6-Pin Plug, 10ft (Approx.)
  • Attached Temperature Sensor, 7.5ft (Approx.)
  • Attached Temperature Sensor Bulb, 5/16 inch OD, 2.1 inch L (Approx.)
  • 4-Button Overlay
  • 4 Mounting Screws
  • 4-Air Tubing, 1/8inch ID, 10ft L (Approx.)
  • Installation Instructions

Dimensions (Approx): Finished Size 3-3/8 inch X 8.0 inch

Hole Cutout Size: Cutout: 2-5/8 inch x 7-7/16 inch

This item comes with a one year limited warranty.

NOTE: Depending on availability, the Overlay/Label may ship with a different color, text, and/or button shape than the picture shown above.

When selecting your spa topside panel, it’s critical that you go by part numbers and not just by appearances or the model number. The part number on a spa topside panel can be found on a white sticker located directly under the topside panel (The ID label may be located on the casing of the topside panel, and the topside panel may need to be removed from the hot tub to get to this label). Buy based on this part number. Model numbers may provide many different options, and choosing the correct option is very critical. Do NOT purchase a hot tub topside panel just because it looks the same as the one you’re replacing. Spa topside panels can look identical, but be programmed differently to work with different spa controllers and circuit boards. ALSO pay attention to the type of cable plug that is on the end of the topside cable. Different spa topside panels use a certain type of cable plug that plugs into compatible spa controllers and circuit boards. Replacement spa topside panels are shipped in clear sealed bags with Yellow Warning Label. Verify through the clear sealed bag that the correct topside panel was received prior to opening the bag. Sealed bags that are opened voids the return policy for spa topside panels.

Write Your Own Review
You're reviewing:Aqua-Set Topside Panel, Len Gordon, 110V, 4-BTN, 4001-4SS, 10ft Cord, 930750-516
Your Rating
Contact Us